Brake Controller Connector Location on a 2004 Ford F-250

Question

Question:

Can you tell me where the connection point is on a 2004 Ford f-250 super duty for a Tekonsha Voyager

asked by: Clay C

0

Expert Reply:

To connect your Tekonsha Voyager # 39510 to your 2004 Ford F-250 you will need the Adapter # 3035-P which connects to a plug under your driver side dash.

Typically the OEM connector can be seen pretty easily but for your vehicle you actually have to take that panel off that is under your steering wheel. The connector will be on the right side after you take the panel off. I have attached a picture of this as well as a video of our team installing the Tekonsha Prodigy P3 # 90195 with the same adapter on a 2004 F-250 for you to reference starting at the 2:30 mark.

expert reply by: Jon G

0

click to enlarge

Answer 1

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 2

What type of brake controller do you have? Is it a proportional or time delayed? Also, are you using the brake pedal or the manual override? If you have a proportional brake controller and you are using the manual override then you should see a full…

view full answer...

Answer 3

To access the correct port to insert #3035-P, you may need to remove the dash panel on the driver side under the steering column. The connector you need will be on the far right, near the center console area. I have included a link to the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 9

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 12

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Brake Controller Connector Location on a 2004 Ford F-250

Featured Help Information

Miscellaneous Media

Continue Researching