Clamp Recommendation for Securing Thule Xsporter Ladder Rack to 2005 Toyota Tundra

Question

Question:

Hello I am looking for clamps for a 2005 Toyota Tundra.

asked by: Casey R

0

Expert Reply:

I checked with Thule and to install the Thule Xsporter part # TH500XT that you appear to have in your 2005 Toyota Tundra would require the standard clamps that come with this ladder rack like the part # 8523159001 that you referenced. Then for new hardware you'd want the part # TH752-1391-001.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Hey Taylor. The TorkLift SuperHitch Magnum item #TLD1111-30 will install in place of your factory hitch on your 2021 Ram 3500 long bed dually's factory hitch. However, the rear brackets of the TorkLift Tie Downs item #TL75FV you purchased, are…

view full answer...

Answer 6

Hey Dave, welcome back! The only front hitch that fits the diesel models is the EcoHitch Hidden Front Mount Trailer Hitch #EH37FR. Installation will require some trimming. You can see what it's like in the installation video linked further down…

view full answer...

Answer 7

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 8

Hey Victor, yes the Long U-Bolt Kit part #RM33KT is a Roadmaster brand u-bolt kit. This does include nuts and washers as well.

view full answer...

Answer 9

Yes, the Hellwig Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter #HE24MR is confirmed to fit the 2023 Ram 3500 models with the 6.7L diesel engine. This will work with 2WD/4WD models and is fine with dually models as well.

view full answer...

Answer 10

Hello Brian, I don’t have any available to ship out, but I was able to go out to the warehouse and get the information you need. The attached photos show the exact cutout for the Coleman-Mach Underbunk RV AC All-In-One Kit w/ Heat Pump – Ducted –…

view full answer...

Answer 11

Hey John, yes the flow through sensors like the part #TST-507-FT-S4 and the cap style like part #TST-507-RV-S2 both work with the 507 style monitor you have now. The flow through is generally the preferred style since it allows you to inflate through…

view full answer...

Answer 12

It sure will Shawn. The B&W 5th Wheel to Gooseneck Pin Box item #BW73RV does indeed come with the required safety chains. This pin box is designed to replace a Lippert 1621, 1621HD, 0719, Fabex PB 600 Series pin box. There is also a shim kit item…

view full answer...

Clamp Recommendation for Securing Thule Xsporter Ladder Rack to 2005 Toyota Tundra

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching