Can CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers # CE27672 be Used on Tritoon

Question

Question:

I have a 2016 Lowe SS230 tritoon, will these work?

asked by: Troy L

0

Expert Reply:

The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers # CE27672 can pretty easily be used on a tritoon pontoon like what you have.

expert reply by: Jameson C

0

Answer 1

I have another option for you, but the CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair #CE27600 you were looking at are designed for standard boats and not Tritoons. Instead I recommend the CE Smith Bunk Style Guide-Ons for…

view full answer...

Answer 2

Though we do not have an option that would have a perfect 90 degree angle, I may still have something that would work. The CE Smith #CE27610 is a little smaller and typically installed on the outside of a trailer frame, but can be used however…

view full answer...

Answer 3

We do offer a variety of pontoon boat trailer guide-on and roller products that you can see by clicking on the link provided. I reviewed photos of Tracker Trailstar pontoon boat trailers and noted some are equipped with post-style guide-ons like…

view full answer...

Answer 4

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

view full answer...

Answer 5

I checked with CE Smith and you will want to torque the 1/2" bolts of the U-Bolt Kit item #CE23003 to 65 ft lbs.

view full answer...

Answer 6

The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers part #CE27672 can be installed at the rear of the trailer or towards the center. That said, the further back they are installed the better they will do to help guide the boat on. I have…

view full answer...

Answer 7

The great thing about boat trailers is that everybody tends to have a different setup and the amount of CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672 you need really boils down to what you plan on having on your trailer. If you…

view full answer...

Answer 8

One pair of guide-ons like the CE Smith #CE27672 should be sufficient as the V-shaped bunks should guide the pontoons in the rest of the way onto the trailer and keep everything properly aligned. If you click the provided link, you can see a video of…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Can CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers # CE27672 be Used on Tritoon

Product Page this Question was Asked From

Continue Researching