How Many CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers Are Needed

Question

Question:

I see that many buy two sets but my husband thinks we only need one pair. What is your opinion?

asked by: Ann E

0

Expert Reply:

The great thing about boat trailers is that everybody tends to have a different setup and the amount of CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers # CE27672 you need really boils down to what you plan on having on your trailer.

If you don't already have upright wooden bunks on your trailer (see attached) and you're looking to use these solely then I'd say to get 2 sets. However, if you do have upright bunks then you probably just need 1 set to help you get the pontoon lined up.

expert reply by: Jon G

0

click to enlarge

Answer 1

Yes, guide-on rollers like the CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672 will work for a Tri-toon as well. The install video I attached is actually on a tri-toon, this will show you the install process.

view full answer...

Answer 2

You would not want to use the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System #AR74FR for a pontoon or tritoon. This is because of the installation style and function. I have included a picture that demonstrates how these guides work, and…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

How Many CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers Are Needed

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching