How Many Pairs of CE27672 Guide-Ons for Pontoon Boat Trailer

Question

Question:

Will one pair be sufficient or should I get two pair. We have a Coach 22ft on a Bear trailer.

asked by: Leonard T

0

Expert Reply:

One pair of guide-ons like the CE Smith # CE27672 should be sufficient as the V-shaped bunks should guide the pontoons in the rest of the way onto the trailer and keep everything properly aligned.

If you click the provided link, you can see a video of my buddy Randy walking through a typical installation.

expert reply by: Mike L

0

Answer 1

The great thing about boat trailers is that everybody tends to have a different setup and the amount of CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672 you need really boils down to what you plan on having on your trailer. If you…

view full answer...

Answer 2

The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers part #CE27672 can be installed at the rear of the trailer or towards the center. That said, the further back they are installed the better they will do to help guide the boat on. I have…

view full answer...

Answer 3

Though we do not have an option that would have a perfect 90 degree angle, I may still have something that would work. The CE Smith #CE27610 is a little smaller and typically installed on the outside of a trailer frame, but can be used however…

view full answer...

Answer 4

The pontoon trailer guide-ons only come in a set of 2 as that is all that is needed, although you can add more if you believe that it is necessary. That all just depends on how confident you are about staying on the right track once you have started…

view full answer...

Answer 5

As you will be loading and unloading in the stronger river current I recommend using the CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672. These use rollers that will allow for your pontoon to load easier onto your boat trailer.…

view full answer...

Answer 6

The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672 can pretty easily be used on a tritoon pontoon like what you have.

view full answer...

Answer 7

I have another option for you, but the CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair #CE27600 you were looking at are designed for standard boats and not Tritoons. Instead I recommend the CE Smith Bunk Style Guide-Ons for…

view full answer...

Answer 8

We do offer a variety of pontoon boat trailer guide-on and roller products that you can see by clicking on the link provided. I reviewed photos of Tracker Trailstar pontoon boat trailers and noted some are equipped with post-style guide-ons like…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

How Many Pairs of CE27672 Guide-Ons for Pontoon Boat Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching