Cover Recommendation for Coleman Mach 8 AC Unit on RV

Question

Question:

I have a Coleman Mach 8 47204B876 RV Rooftop Air Conditioner, 15,000 BTU, White 42Long x 28.5Wide x 8.25High Do you have a cover for this? Thanks

asked by: Rod

0

Expert Reply:

For the Adco cover # 290-3023 would fit and work well.

expert reply by: Jameson C

0

Answer 1

I would be happy to help! The charge current coming from the alternator is not going through the converter portion of your your panel as a converter converts AC power from shore power or a generator to DC power for your batteries. Since the…

view full answer...

Answer 2

I spoke to Go Power! and they informed me that in regards to the Go Power RV Converter and Smart Battery Charger #34266167, and they informed me that, none of their converters have two 12v outputs like previously mentioned, and that it should be a…

view full answer...

Answer 3

On the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA you need to verify that the converter/charger is set to the appropriate battery type that it is charging. It is common for the converter to get warm and the fan…

view full answer...

Answer 4

According to Progressive dynamics, the circuit board in your converter is going bad and needs to be replaced using part #PD4060CSV. According to my contact, there's no danger of fire but eventually the converter will stop working.

view full answer...

Answer 5

That area where the fan is and buzzing sound you referenced is your power converter. That is what converts the 120v AC shore power into the 12v DC power for your lights, fans, etc., and charges/maintains your battery. To replace that converter with a…

view full answer...

Answer 6

I have attached a link to the covers we carry. I was unable to determine a good recommendation. I will forward a question to manufacturer as well and follow-up with response. Since the Adco RV Air Conditioner Cover for Coleman Mini Mach or Super…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hey Kyle! That is correct. The Coleman-Mach Mach-C Everest has variable-speed cooling and an inverter-driven compressor. However, the Mach-C Everest uses a traditional wall thermostat instead of a remote control. It also works with both ducted and…

view full answer...

Answer 12

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Cover Recommendation for Coleman Mach 8 AC Unit on RV

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching