Hitch, Bike Rack and Cargo Carrier Recommendation for 2016 Toyota Sienna

Question

Question:

I have a question regarding the ballmount for the hitch. Which one is recommended? Seems like the tow hitch sits very low after installed.

asked by: Simon

0

Expert Reply:

For a hitch for your 2016 Toyota Sienna the Draw Tite part # 76112 is the best option. It is a 2 inch hitch with plenty of capacity and also has a concealed crosstube so it won't be super visible.

I have a great option for a cargo carrier and a bike rack but you can't use a trunk rack with a cargo carrier at the same time. Instead check out the Hollywood Rack Sport Rider SE2 Platform 2 Bike Rack w/Cargo Carrier # HR1450Z-85. This allows you to carry both a cargo carrier and a bike rack at the same time.

expert reply by: Jameson C

0

Simon

7/10/2018

I have a question regarding the ballmount for the hitch. Which one is recommended? Seems like the tow hitch sits very low after installed.

Jameson C.

7/10/2018

I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will measure the coupler height from the ground to the bottom of the trailer coupler when the trailer is on level ground. Next, you will need to compute the difference. If the hitch height is greater than the coupler height the difference is the drop required. If the coupler height is greater the difference is the rise required. You will want to pick the ball mount with the rise/drop closest to the difference.

Answer 1

We do have a 7-Way wiring connector that you can add to your 2014 Toyota Sienna so you can tow your pop up camper! You do need to already have a 4-Way though. If you don't have a 4-Way connector then I recommend going with the Tekonsha T-One…

view full answer...

Answer 2

We do have an air bag suspension enhancement kit that fits your 2021 Toyota Sienna with the Firestone part #F4155 that you referenced.

view full answer...

Answer 3

Ground clearance is definitely important so a concealed trailer hitch is a smart choice for your 2019 Toyota Sienna. Somewhat surprisingly, when we test fit trailer hitches that fit a '19 Sienna, they each had the same approximate 13"…

view full answer...

Answer 4

There is not a minimum clearance required by law for a trailer hitch, so you simply want to make sure you are able to travel without bottoming out your receiver. For instance, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13105…

view full answer...

Answer 5

Both the Curt #C13343 and the Draw-Tite #76112 for the 2015 Toyota Sienna XLE are virtually identical. There are no limitations as far as stabilizer straps being required for either hitch. I used to have a 2013 Sienna XLE and we actually had the…

view full answer...

Answer 6

I can absolutely help with choosing a trailer hitch for your 2020 Toyota Sienna that will give you the best ground clearance. There are quite a few hitch options available for your vehicle, but the models that will sit highest off the ground when…

view full answer...

Answer 7

Hello Nick, thanks for reaching out. To answer your first question, coil helpers like the Firestone #F4155 will not raise your Sienna beyond the factory ride height. If the hitch and bike rack are causing some squatting, the air bags will help to…

view full answer...

Answer 8

I would be happy to answer those questions for you. The Air Lift 1000 Air Helper Springs for Coil Springs item #AL60732 provide 1,000 lbs of support. Anything over that maxes out the system and it won't work as well. It is recommended not to…

view full answer...

Answer 9

Hey Daniel thanks for all the questions! One of them is going to be pretty easy but also disappointing, every hitch for your 2019 Toyota Sienna is going to require the panel to be removed, trimmed, then reinstalled. This is actually not as hard to do…

view full answer...

Answer 10

The main differentiation between the available Class III hitches is how they'll appear once installed. The etrailer brand #e98837 and the Draw-Tite #75237 will have the entire hitch visible under the rear bumper. In contrast, the Draw-Tite #76112…

view full answer...

Answer 11

Based on my research it looks like the factory towing package for the 2018 Toyota Sienna consists of an engine oil cooler along with a heavy-duty radiator and fan. The factory towing package is standard for the XLE model like what you have. With the…

view full answer...

Answer 12

Sure thing! I'm attaching the exhaust hanger article to this answer page for your reference so you can get this issue fixed for your Draw-Tite Max-Frame Trailer Hitch Receiver #76112 installation on your 2020 Toyota Sienna. Bending the exhaust…

view full answer...

Hitch, Bike Rack and Cargo Carrier Recommendation for 2016 Toyota Sienna

Featured Help Information

Miscellaneous Media

Continue Researching