Will B&W Companion Slider Hitch For Ford OEM Pucks Fit Aftermarket Reese Elite Install Kit RP30126

Question

Question:

Will the BandW BWRVK3370 work with part number RP30126 Under-Bed Rail and Installation Kit?

asked by: Darrin

0

Expert Reply:

B&W Companion OEM 5th Wheel Trailer Hitch # BWRVK3370 will fit the Reese Elite install kit # RP30126 since it will have the same puck spacing as the factory version which is also made by Reese.

expert reply by: Michael H

0

Answer 1

Thank you for all of the information! Since you are looking to install the under-bed rail kit we will start there and then select a 5th wheel hitch after that. For your 2016 Ford F-250 Super Duty with the 6-3/4' bed we have the Reese Elite Series…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

The B&W Companion Hitch #BWRVK3370 is a complete sliding hitch that is designed to fit in the Ford OEM prep package. The Replacement Slider Base for B&W OEM 5th Wheel Trailer Hitch - Ford Towing Prep Package - 20K #BWRVB3370 is just the base…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Answer 8

Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…

view full answer...

Answer 9

Hi Frank; the #RP74FR (68204) and #SWW-06 look different because they are a little different. The #RP74FR is only designed to work with the 68220 and 69220. If you have a different Sidewinder this wedge will not fit. It also fits a wider range of 5th…

view full answer...

Answer 10

Hello Sean, Thanks for writing in. For a replacement hardware kit you will want to order the Replacement Hardware Kit for Trailer Hitches #RHK. Above "ADD TO CART" you will need to put "Curt C15410" so the warehouse knows what…

view full answer...

Answer 11

Hello Dan, Welcome to etrailer. I am really glad you found us! First off, congrats on the North Point!! You are absolutely right to question the salesperson’s recommendation. Unfortunately, some dealers focus more on moving units than on making sure…

view full answer...

Answer 12

Hey Doug. So long as your Husky 5th wheel hitch isn't three decades old you shouldn't have any issues attaching it to the B&W Custom Installation Kit w/ Base Rails item #BWRVK2402. Most 5th wheel hitches for the last 20 years have used…

view full answer...

Will B&W Companion Slider Hitch For Ford OEM Pucks Fit Aftermarket Reese Elite Install Kit RP30126

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching