How to Install the Draw-Tite Trailer Hitch Receiver Part # 24857 on a 2007 BMW 328i or 328xi

Question

Question:

Do you have a video on the installation of 24857?

asked by: Manuel

0

Expert Reply:

I do have the written installation instructions of the Draw-Tite Sportframe Trailer Hitch Receiver part # 24857 which I have attached for you but unfortunately, we have not yet had the chance to install this hitch on a 2007 BMW 328i or 328xi. The installation process as you can see is fairly straightforward. You will not have to do any drilling but there may be trimming or removal of underbody panels required.

If you can tell me what you will be using this hitch for, I would be happy to provide some recommendations for you.

expert reply by: Conner L

0

click to enlarge

Answer 1

There is a hitch available for your 2011 BMW 328i Sedan, but the Valley Stealth Vertical Trailer Hitch, part #V81821, will not fit your vehicle. This hitch is designed to fit the BMW 335i convertibles, coupes and sedans. You would want a Draw-Tite…

view full answer...

Answer 2

The Curt #C59496 you asked about is indeed the recommended trailer wiring harness for your 2011 BMW 328i. This harness is a multi-fit item that will work with many different vehicles. The install procedure will involve using the included circuit…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

How to Install the Draw-Tite Trailer Hitch Receiver Part # 24857 on a 2007 BMW 328i or 328xi

Continue Researching