Trailer Idler Hub for 2,000 Pound Axle and 13 Inch Tires
Updated 06/01/2018 | Published 05/31/2018
Products Featured in This Question
Question:
Im looking at a hub kit that has 8-12inch Wheel sizeinch in the description. What if I want to put a 13inch rim with 175/80r13 tires on it?
asked by: Charlie
0
Expert Reply:
There isn't enough surface area on hub # AKIHUB-545-2-1K to safely mount and use a 13 inch wheel. The hub would have to be larger to properly support a 13 inch wheel. For a hub that uses the same bearings, can take a 13 inch wheel, and also has a 5 on 4-1/2 bolt pattern we have # AKIHUB-545-2-LFEZ-1K for EZ Lube axles or # AKIHUB-545-2-LF-1K for regular axles.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: grease seals ~ double lip trailer bearings races seals caps
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Search Results: stickers
- Search Results: l44643 / l44643 trailer hubs and drums
- Search Results: hitch wiring tester
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: Easy Grease Trailer Idler Hub Assembly for 2K Axles Spec Review
- Article: How to Determine Tire/Wheel Diameter
- Q&A: Recommended Hub for a Axle w/ a L44643 Inner and Outer Bearing and a 5 on 4-1/2" Lug Pattern
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Video: Complete Breakdown of the Trailer Idler Hub Assembly for 2K Axles
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Search Results: bt8
- Search Results: circuit breaker
- Search Results: surface mount
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Shop: Brophy Circuit Tester for 4-Pole Flat Trailer Connector
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: Trailer Idler Hub Assembly for 2K Axles Review
- Q&A: How to Determine Correct Replacement Hub for Coleman Pop-Up Camper
- Q&A: Should I Stay With 13" Wheels Or Upgrade To 14 Wheels?
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: How Often Should Trailer Bearings and Seals be Replaced
- Q&A: When Should Trailer Wheel Bearings be Replaced
- Video: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel: The Breakdown
- Q&A: Replacement Hub with 1" Bearings and a 5 on 4-1/2" Bolt Pattern