bing tracking image

Review of etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-1K

content loading

Customers compare AKIHUB-545-2-LF-1K to these similar products




Products Featured in this Video



etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-1K Review


Jeff: Hello everybody. This is Jeff at etrailer.com. Today we're going to take a look at this pre greased trailer idler hub for 2000 pound axles. Has the five on four and a half inch bolt pattern. Now this trailer idler hub assembly, designed to fit idler axles, it is a pre-greased hub, which makes it easy to install. There's no need to pack your bearings with grease.

It'll come to you already greased with the lithium complex multipurpose grease. It will include a pre-greased inner and outer bearing, and they use the same inner outer bearing part number. It's part number L44643. The bearing races will be pre-installed with the bearings right in, and it does have the pre-installed grease seal on the back here. It's part number 34823.

Will come with this grease cap, and as you can see the five half inch by 20 size lug nuts.Now this is a sturdy iron construction. They do use a zinc enriched paint on this hub to add durability, and it is QAI and CSA certified. Few specs again, it's designed to fit 2000 pound trailer axles with the BT8 spindles. It is compatible with standard axles from most manufacturers, including Dexter, Lippert, and Alco. The hub diameter is 6.25 inches.

So it will fit 13 inch to 15 inch wheels. And the bolt pattern again on this is five and four and a half inches. The wheel stud diameter is a half an inch. So these half inch lug nuts will go on there, screw on there to hold your wheel to your assembly. And the weight capacity on this hub is 1000 pounds, so when this is used with one on the other side of your axle, they'll meet the 2000 pound axle capacity.But that should do it for the review on the pre-greased trailer idler hub for 2000 pound axles, and it has the five on four and a half inch bolt pattern..


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.