Finding Correct Hub Bearings
Updated 01/20/2020 | Published 01/17/2020
Products Featured in This Question
Question:
I purchased 2 of these kits with L44363 bearings but I misread the number on old bearing. They are L44369. would these bearings still fit this hub?
asked by: Dabney G
Expert Reply:
While you've already pulled the hubs and got your bearing numbers, that is not a common bearing size unless you meant L44649. I recommend using a digital caliper like part # PTW80157 and measure the axle spindle where the bearings ride and then measure the inside dimension of the hub.
We can't confirm that hub will fit however until you have those measurements. Included is a helpful diagram as well.
After you have gotten the measurements let me know and I will be glad to make some recommendations that will work for you.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: tire balancing beads accessories and parts
- Search Results: cotter
- Video: Feature Breakdown: Cotter Pin
- Video: Easy Grease Trailer Idler Hub Assembly for 2K Axles Spec Review
- Video: Complete Breakdown of the Trailer Idler Hub Assembly for 2K Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Kenda Karrier KR53 ST175/80R13 Radial Trailer Tire with 13" Silver Mod Wheel - 5 on 4-1/2
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Q&A: Replacing Hubs On a 4' X 6' Carry On Trailer From 4 on 4" Lugs to 5 on 4-1/2" Lug Pattern 15" Wheels
- Q&A: Can I Replace 4 Leaf Springs With 5 Leaf Springs For The Axle On My Trailer
- Search Results: trailer lug nuts
- Search Results: trailer jack
- Q&A: What Grease To Add to Pre-Greased Trailer Idler Hub Assembly for 3,500-lb Axles
- Q&A: What Do The Letters Mean in the ST205/75D15 C Tire Size on My Camping Trailer
- Search Results: dexter trailer axles
- Search Results: wheel bearing grease
- Search Results: trailer leaf springs
- Q&A: Are Shorter Length Hub Assemblies Available
- Video: Protect Your Bearings! Inside Look at Bearing Buddies with the Manufacturer
- Video: Bearing Buddy Bearing Protectors-BB1980A-SS Spec Review
- Q&A: Replacement Hub with 1" Bearings and a 5 on 4-1/2" Bolt Pattern
- Q&A: Replacement Hub Assembly Needed for 4,800 lb 1992 Ranger Trail Tandem Axle Trailer