Trailer Jack Recommendation with Pipe Mount and Wheel Caster

Question

Question:

I need a Pipe Mount, Top Crank, with a wheel. I find Pipe mount with the ability to add a wheel. I find pipe mount, top crank with a foot, but no pipe mount, top crank with a wheel possibility.

asked by: Dirk

0

Expert Reply:

It's odd, but you are correct there isn't a trailer jack we offer that matches all of the criteria you need for your trailer. You'd have to compromise with a jack like the # BD158452 that doesn't have the wheel or with something like the part # BD1541150301 which is sidewind and a wheel like the # BD500245.

expert reply by: Jameson C

0

Answer 1

I recommend the Bulldog Round, Pipe-Mount Swivel Jack #BD1541150301 to replace the Fulton jack currently on your trailer. The Bulldog jack uses the same Pipe Mount connection so that you can easily replace your jack. The jack is rated for 2,000lbs…

view full answer...

Answer 2

The main difference between a ST205/75-14 size tire like the Contender #AC14R45SM and a ST215/75-14 size tire like the Taskmaster Provider Item #TTWTR21514 is that the larger number is a slightly larger size. The 205 has a section width of 7.99"…

view full answer...

Answer 3

Hello Brian, thanks for reaching out. I am looking at pictures of these TowSmart/USA Trailer Store Trinity MT3 trailers online and I am not seeing a great way to attach a tongue jack. In the pictures I see there is really no extra space on the…

view full answer...

Answer 4

We can't recommend the use of the Bulldog wheel caster with the Ultimate Trailer Jack #322-RDJ-2K. The only one that can be used is the #JC-102 which is a confirmed fit.

view full answer...

Answer 5

The Bulldog Pipe Mount Jack part #BD1541150301 would work well for you. This jack is a pipe mount like you would need and has the ability to install a wheel like part #BD500245 or a foot plate like part #BD018564. You should note that with the wheel…

view full answer...

Answer 6

Hi Tom, The correct male pipe adapter for the Bulldog Sidewind Jack for Genie Basket Lifts #BD150415 is the Replacement Male Pipe #TJP-IP58-CTN.

view full answer...

Answer 7

I went out into our warehouse and pulled a Bulldog Round, Pipe-Mount Swivel Jack, part #BD178203, that has the same 2 inch inner diameter and 2.5 inch outer diameter pipe mount swivel jack as yours. I then test fit a Bulldog 2-1/2 inch Long, Weld-On…

view full answer...

Answer 8

The Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 10" Lift - 2,000 lbs #PS1401060303 has an overall length when retracted of 16-5/8 inches. This jack does not have a wheel. For a similar jack with a wheel, I recommend the…

view full answer...

Answer 9

The item you selected, Bulldog Jack, Sidewind Swivel - 2,000 lbs, part #BD1541150301, requires the use of a pipe mount to be welded to the frame of your trailer. I contacted our representative at Bulldog, and he informed me that to mount part…

view full answer...

Answer 10

I have a replacement jack option for you, but I do not recommend cutting off the footplate and drilling a hole in the tube to mount a caster like the Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs Item #JC-102 to…

view full answer...

Answer 11

Hey Gill. It sounds like you need a jack for your utility trailer. If you have an a-frame trailer tongue with a hole drilled into the center you can use the Round A-Frame Trailer Jack item #TJA-2002-B with the foot plate #JF-101BK or item #JC-101 if…

view full answer...

Answer 12

Hi Rick, What you're referring to is a snap ring swivel plate which would require the appropriate mounting plate being welded to the jack. Instead you can use the etrailer Bolt-On Swivel Mounting Plate #e52JR to attach the Bulldog Round,…

view full answer...

Trailer Jack Recommendation with Pipe Mount and Wheel Caster

Continue Researching