How To Attach Bulldog Trailer Jack # BD1541150301 To Trailer

Question

Question:

Do you sell what attaches to the trailer or is it just pipe with 2 holes in it ,,,

asked by: David K

0

Expert Reply:

The item you selected, Bulldog Jack, Sidewind Swivel - 2,000 lbs, part # BD1541150301, requires the use of a pipe mount to be welded to the frame of your trailer.

I contacted our representative at Bulldog, and he informed me that to mount part # BD1541150301, you will need the Weld-On Jack Pipe Mount, part # BD015279, which will need to be welded to your trailer frame.

I would recommend having a trailer professional weld part # BD015279 on your trailer so that you can install the Bulldog Jack, part # BD1541150301.

expert reply by: Reno H

0

Answer 1

Yes, Bulldog pipe mounts #BD015279 and #BD005024 are compatible with each other. I have included links to videos on both parts for you.

view full answer...

Answer 2

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118727 is what I recommend for a 2021 Jeep Grand Cherokee without tow package. This can then be adapted to a 7-way using the 4 to 7-Way with 4-Way Adapter part #ETBC7. A 6-way…

view full answer...

Answer 3

The main difference between a ST205/75-14 size tire like the Contender #AC14R45SM and a ST215/75-14 size tire like the Taskmaster Provider Item #TTWTR21514 is that the larger number is a slightly larger size. The 205 has a section width of 7.99"…

view full answer...

Answer 4

I recommend the Bulldog Round, Pipe-Mount Swivel Jack #BD1541150301 to replace the Fulton jack currently on your trailer. The Bulldog jack uses the same Pipe Mount connection so that you can easily replace your jack. The jack is rated for 2,000lbs…

view full answer...

Answer 5

The Bulldog Pipe Mount Jack part #BD1541150301 would work well for you. This jack is a pipe mount like you would need and has the ability to install a wheel like part #BD500245 or a foot plate like part #BD018564. You should note that with the wheel…

view full answer...

Answer 6

The Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate - Sidewind - 10" Lift - 2,000 lbs #PS1401060303 has an overall length when retracted of 16-5/8 inches. This jack does not have a wheel. For a similar jack with a wheel, I recommend the…

view full answer...

Answer 7

Hello Brian, thanks for reaching out. I am looking at pictures of these TowSmart/USA Trailer Store Trinity MT3 trailers online and I am not seeing a great way to attach a tongue jack. In the pictures I see there is really no extra space on the…

view full answer...

Answer 8

I have a replacement jack option for you, but I do not recommend cutting off the footplate and drilling a hole in the tube to mount a caster like the Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs Item #JC-102 to…

view full answer...

Answer 9

Hey Gill. It sounds like you need a jack for your utility trailer. If you have an a-frame trailer tongue with a hole drilled into the center you can use the Round A-Frame Trailer Jack item #TJA-2002-B with the foot plate #JF-101BK or item #JC-101 if…

view full answer...

Answer 10

I went out into our warehouse and pulled a Bulldog Round, Pipe-Mount Swivel Jack, part #BD178203, that has the same 2 inch inner diameter and 2.5 inch outer diameter pipe mount swivel jack as yours. I then test fit a Bulldog 2-1/2 inch Long, Weld-On…

view full answer...

Answer 11

The overall height of the etrailer.com jack part #TJP-5001-Z that you referenced is 15-1/4 inches when fully retracted and since it has a travel distance of 10 inches the overall height when fully extended is 25-1/4 inches.

view full answer...

Answer 12

Hi Tom, The correct male pipe adapter for the Bulldog Sidewind Jack for Genie Basket Lifts #BD150415 is the Replacement Male Pipe #TJP-IP58-CTN.

view full answer...

How To Attach Bulldog Trailer Jack # BD1541150301 To Trailer

Continue Researching