Male Pipe Adapter For Bulldog Sidewind Jack for Genie Basket Lifts

Question

Question:

What size male pipe adapter would fit this bulldog #BD150415

asked by: Tom

0

Expert Reply:

Hi Tom,

The correct male pipe adapter for the Bulldog Sidewind Jack for Genie Basket Lifts # BD150415 is the Replacement Male Pipe # TJP-IP58-CTN.

expert reply by: Kyle S

0

Jameson C.

1/5/2026

Hey Tom, did the replacement male pipe end up fitting your Bulldog sidewind jack the way you needed? Knowing how it worked could really help others matching parts for similar jacks.

Answer 1

Because the fit to the trailer of a pipe mount jack is a little loose due to the large tolerance between the jack and the pipe mount on the trailer, it's pretty rare to find a pipe mount jack with a removable foot that would allow a caster wheel…

view full answer...

Answer 2

Thanks for the pictures. Everything definitely looks the same and the Bulldog #BD150415 is designed specifically for Genie basket lifts. Also, your picture that shows the label code of F3351 helps a lot becasue part #BD150415 has the same label on…

view full answer...

Answer 3

The foot on the inner tube on Pro Series trailer jack #PS1401480303 is attached, all one part, so you would not be able to add a wheel. None of the pipe-mount swivel jacks come with a wheel. Your best option would be to replace the jack with…

view full answer...

Answer 4

The main difference between a ST205/75-14 size tire like the Contender #AC14R45SM and a ST215/75-14 size tire like the Taskmaster Provider Item #TTWTR21514 is that the larger number is a slightly larger size. The 205 has a section width of 7.99"…

view full answer...

Answer 5

I recommend the Bulldog Round, Pipe-Mount Swivel Jack #BD1541150301 to replace the Fulton jack currently on your trailer. The Bulldog jack uses the same Pipe Mount connection so that you can easily replace your jack. The jack is rated for 2,000lbs…

view full answer...

Answer 6

The Bulldog Pipe Mount Jack part #BD1541150301 would work well for you. This jack is a pipe mount like you would need and has the ability to install a wheel like part #BD500245 or a foot plate like part #BD018564. You should note that with the wheel…

view full answer...

Answer 7

I went out into our warehouse and pulled a Bulldog Round, Pipe-Mount Swivel Jack, part #BD178203, that has the same 2 inch inner diameter and 2.5 inch outer diameter pipe mount swivel jack as yours. I then test fit a Bulldog 2-1/2 inch Long, Weld-On…

view full answer...

Answer 8

Hi Rick, What you're referring to is a snap ring swivel plate which would require the appropriate mounting plate being welded to the jack. Instead you can use the etrailer Bolt-On Swivel Mounting Plate #e52JR to attach the Bulldog Round,…

view full answer...

Answer 9

Hey Gill. It sounds like you need a jack for your utility trailer. If you have an a-frame trailer tongue with a hole drilled into the center you can use the Round A-Frame Trailer Jack item #TJA-2002-B with the foot plate #JF-101BK or item #JC-101 if…

view full answer...

Answer 10

We can't recommend the use of the Bulldog wheel caster with the Ultimate Trailer Jack #322-RDJ-2K. The only one that can be used is the #JC-102 which is a confirmed fit.

view full answer...

Answer 11

Hello Brian, thanks for reaching out. I am looking at pictures of these TowSmart/USA Trailer Store Trinity MT3 trailers online and I am not seeing a great way to attach a tongue jack. In the pictures I see there is really no extra space on the…

view full answer...

Answer 12

I have a replacement jack option for you, but I do not recommend cutting off the footplate and drilling a hole in the tube to mount a caster like the Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs Item #JC-102 to…

view full answer...

Male Pipe Adapter For Bulldog Sidewind Jack for Genie Basket Lifts

Products Featured in This Question

Continue Researching