Replacement Hardware Kit for Trailer Hitches

Question

Question:

need bolt hardware kit for Curt class 3 hitch - 13367 - for an FJ crusier - thx

asked by: Terry

0

Expert Reply:

The replacement hardware kit for Curt Trailer Hitch Receiver # 13367 is Replacement Hardware Kit for Trailer Hitches # RHK.

If you follow the # RHK link from this answer page, it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item Number. You would enter part # 13367.

Next, select "Curt" from the Manufacturer drop down menu. Then select the quantity of hardware kits you need and add to the cart and you will be good to go.

expert reply by: Timothy G

0

Answer 1

The Replacement Hardware Kit for Curt SecureLatch Pintle Mount #C52CR is 1/2" coarse thread, and measures 2-3/16" long overall, with the threads measuring 2-5/8" long.

view full answer...

Answer 2

Looking at your picture you will not need an exhaust tip extension. Actually, if you used one it would fit around the existing tip making the pipe closer to the hitch. The fact that the exhaust exits down and not at the hitch and the pipe does not…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Bill, the Advent AC #ACM135 you're looking at will work great as a replacement for your Coleman AC and will let you use your existing setup with the Coleman adapter #ACCOLKIT.

view full answer...

Answer 10

If you're just wanting to replace the rooftop unit and keep the rest of your Coleman Mach equipment then you'll need Furrion part #FR82PV, which will come with a wire harness adapter for a plug-and-play installation. If you want to replace…

view full answer...

Answer 11

Hey Nick, thanks for reaching out. Yes, the Replacement Fabric for etrailer Powered RV Awnings #e96QV will work with other brands of awning like Solera or Dometic which are what we commonly see on campers like your 2011 Forest River Cherokee 29U. The…

view full answer...

Replacement Hardware Kit for Trailer Hitches

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching