What Kind Of Bolts Are Used In The Replacement Hardware Kit For Curt SecureLatch Pintle Mount?

Question

Question:

Whats the bolt size for the Replacement Hardware Kit for Curt SecureLatch Pintle MountC52CR

asked by: Tiago A

0

Expert Reply:

The Replacement Hardware Kit for Curt SecureLatch Pintle Mount # C52CR is 1/2" coarse thread, and measures 2-3/16" long overall, with the threads measuring 2-5/8" long.

expert reply by: Bryce D

0

Replacement Hardware Kit Curt Secure Latch Measurements
(click to enlarge)

Answer 1

The replacement hardware kit for Curt Trailer Hitch Receiver #13367 is Replacement Hardware Kit for Trailer Hitches #RHK. If you follow the #RHK link from this answer page, it will take you to the replacement hardware kit product page. You will then…

view full answer...

Answer 2

The center to center spacing between the mounting holes in the Replacement Hardware Kit for Curt SecureLatch Pintle Mount #C52CR are 1-3/4".

view full answer...

Answer 3

The Replacement Hardware Kit #RHK will give you the replacement hardware needed to install your Curt Hitch on your 2003 Honda Odyssey. When you get to the #RHK web page there will be two boxes you will have to fill out. The first box you ask you what…

view full answer...

Answer 4

Since the weld nut is broken you'll need to fish wire new hardwire into the frame from a different opening and then out through the hitch's mounting hole. I've linked a video of the process. If you also need replacement hardware for the…

view full answer...

Answer 5

Hey Brad, we don't have any great options for securing a camper to a flat bed truck. Everything we offer was designed for a standard bed so the kits either would attach to the stake pockets of a truck bed, to the front of the truck, or to the…

view full answer...

Answer 6

Hey Larry, the Active Controls ActiveStart Hardwired Soft Start for RVs #AS57FR that you referenced will allow your AC units to come on and not draw quite as much amperage on startup which means you wouldn't need to have as bit of a generator to…

view full answer...

Answer 7

Hey Marty, no the SoftStartup part #SSR64FR is not a surge protector. It will help reduce the large surge of power needed to fire up an AC unit but it does not have any surge protection.

view full answer...

Answer 8

Hey Robert, yes you can use the SoftStartup part #SSR64FR with your Hughes surge protector. This will prevent the large surge needed to fire up AC units but it does not have surge protection built into it.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

What Kind Of Bolts Are Used In The Replacement Hardware Kit For Curt SecureLatch Pintle Mount?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching