What Replacement Part Do I Need For T-rac Pro2 Ladder Rack

Question

Question:

Need brackets for to install t-rac pro 2 ladder on my 2005 2x4 extended cab. So what part # should I order

asked by: Glenn

0

Expert Reply:

I contacted the manufacturer and you need for the T-Rac Pro2 For your 2005 Toyota Tacoma the Replacement Clamp Foot for TracRac, TracOne, and T-Rac Pro2, Item # TAPT-27300.

expert reply by: Brint H

0

Answer 1

The crossbars of the TracRac SR Sliding Truck Bed Ladder Rack #TH43002XT-501 have to be much thicker than Thule and Yakima crossbars because of the difference in weight capacities. The Yakima and Thule racks have weight capacities around 165 lbs…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…

view full answer...

Answer 7

Hey Daniel, thanks for all of the info you listed on your trailer axle. Based on seeing all of that the correct parts are what you mentioned. The brake assembly set part #23-464-465 is correct as well as the hub/drum part #42866UC3-EZ. Did you have…

view full answer...

Answer 8

Hey Daniel congrats on the new truck! The Lomax Stance Hard Tonneau Cover item #LOM54RV does indeed fit the 2026 Chevrolet Silverado EV with the Mid Gate. It also works with the Multi-Flex Tailgate that comes on the Trail Boss models. For a…

view full answer...

Answer 9

Hey Ethel, thanks for reaching out. No, I wouldn't recommend the Valterra StayPut Curved Leveler and Chock #VAL48MB if your tandem tires are only 4" apart. The wedges on the StayPut system need enough room to fit between the tires and create…

view full answer...

Answer 10

I called my contact at Weather Tech and they told me that is you have any step bars within 2 inches of the wheel well opening there is not fit for mud flaps. If you do have more than 2 inches from any step bars then the mud flaps that are designed to…

view full answer...

What Replacement Part Do I Need For T-rac Pro2 Ladder Rack

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching