Recommended Curt Weight Distribution System on 2017 Ford F-150

Question

Question:

Yes a weight distribution system made by Curt.

asked by: Teresa J

0

Expert Reply:

Would you be able to get back to me and let me know what you are referring to in terms of "Curt product?" I assume weight distribution system but want to make sure. Thanks for the inquiry and any additional info you could provide would be very helpful.

expert reply by: Kyle S

0

Teresa

4/16/2018

Yes a weight distribution system made by Curt.

Kyle S.

4/16/2018

In order to choose the best weight distribution system from Curt or any other manufacturer, you will first need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your F-150. The tongue weight is typically between 10% and 15% of your trailer's GVWR but you'll want to verify it by using a scale such as the etrailer # e99044 or by using one of the methods outlined in the help article on determining tongue weight I've linked for you. From there, simply add on the weight of the cargo behind the rear axle of your vehicle and you'll have your TTW. The ideal system would be one in which your TTW would fall somewhere in the middle of the weight distribution system's tongue weight capacity. Based on the 6,400 lb GVWR of your trailer we can estimate a total tongue weight in the 900 lb range, depending on the cargo you have. For that the Curt TruTrack # C17500 would be a good option for you as it is for total tongue weights between 800 lbs and 900 lbs. The issue with Curt systems is that the lower capacities have a very small capacity range so you will need to be diligent in knowing exactly what your total tongue weight is before choosing a system. I have added a link to our page with our selection of Curt weight distribution systems for you to check out as well.

Answer 1

There's a couple key differences between the Equal-I-Zer Weight Distribution systems #EQ37121ET and #EQ37100ET that you referenced. The biggest being that the tongue weight range is different. The part #EQ37100ET has a range of 600-1,000 lbs and…

view full answer...

Answer 2

Welcome back Don! The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item #EQ37120ET is exactly what I would recommend using. This is a solid reliable system and the built in sway control will make a noticeable improvement in ride…

view full answer...

Answer 3

Welcome back Belinda! The Andersen Weight Distribution Hitch w Sway Control - 4" Drop/Rise - 16K GTW, 1.6K TW #AN33VR may work for towing your Grand Design Imagine XLS23LDE with your F-250. However, when we tested it a while back, we didn't…

view full answer...

Answer 4

Hi Mike; we don't have a way to swap out the 2" ball on the Andersen Weight Distribution Hitch #AN88VR. We do have the 2-5/16" ball separately, #AN45VR, but we don't have it as a complete system. If you really want the Andersen,…

view full answer...

Answer 5

Hey Frank. I can give you the dimensions of the shank on the B&W Continuum item #BW28FR but you're going to need to take the measurements on your Silverado 3500 to confirm the tailgate will open. From the hitch pin hole to the center of the…

view full answer...

Answer 6

Hey Michelle! There are definitely a lot of different weight distribution hitch (WDH) options out there. The most important thing is to make sure it is properly rated for the tongue weight of your setup. Looking at the specs for the 2022 Keystone…

view full answer...

Answer 7

There sure is K.C.. For a shorter weight distribution shank that fits a 2-1/2" hitch, I recommend the Equal-i-zer item #EQ90-02-4700. This shank measures 12" long x 9-1/2" tall. It provides up to a 3" drop and has a 16,000 lbs…

view full answer...

Answer 8

Hey Dathan, congratulations on the new truck! The ReCurve R3 uses a standard shank so we do have some options that will work for you. The Equal-i-zer Weight Dist Shank #FA28FR has a 10" rise/6" drop and is 16" long overall. The…

view full answer...

Answer 9

Hi James! With your GVWR being 7,600 pounds, your loaded tongue weight should be around 760 pounds. With that said, I recommend going with the Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW…

view full answer...

Answer 10

Hey Rex! Those are some great questions. A weight distribution hitch (WDH) isn't always needed but in your case you will want one. Typically if the weight of your trailer is more than 50% of the weight of your vehicle it is a good idea to use a…

view full answer...

Answer 11

Hey Jon, I have a solution for you but I would not recommend the Andersen Weight Distribution system part #AN33VR for your 2025 Brinkley Z Air 297. What we have found is that the Andersen system does a decent job with lighter weight trailers but for…

view full answer...

Answer 12

Hey there Layla! There are a few different forms of weight distribution hitches, but the majority of the systems that have sway control use friction bars, which work similar to brake pads on your vehicle. This works really well, but it can sometimes…

view full answer...

Recommended Curt Weight Distribution System on 2017 Ford F-150

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching