Recommended Trailer Tail Lights for 4.25 Inch Opening
Updated 04/11/2018 | Published 04/10/2018
Products Featured in This Question
Question:
My trailer currently has a 4.25inch opening. Whats the smallest diameter hole will this fit in?
asked by: Becky
Expert Reply:
The LED Trailer Tail Light # STL42RMB has screw mounting holes that are 4-1/4 inches on center. The smallest hole this light will fit is 4 inches. You will have difficulty mounting this light as your opening matches the mounting hole locations so you won't get proper hold.
You may want to use the Rubber Grommet for 4" Round Trailer Tail Lights # A45GB along with the # STL55RB which won't use any screws to mount. You will also want the 3 wire pigtail # A45PB.
Product Page this Question was Asked From
Optronics Trailer Light w/ Flange, Weathertight Plug - Brake, Tail, Turn - Submersible - Round - Red
- Trailer Lights
- Tail Lights
- Stop
- Tail
- Turn
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 4 Inch Diameter
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: LED Trailer Tail Light Review
- Video: Review of TecNiq Trailer Lights - Tail Lights - TN94AR
- Shop: TecNiq High Visibility Stop Turn Taillight - 4" - Round - Flange Mount
- Shop: 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Shop: Optronics Trailer Light w/ Flange, Weathertight Plug - Brake, Tail, Turn - Submersible - Round - Red
- Shop: Peterson LumenX LED Trailer Light - Brake, Tail, Turn Signal - Surface Mount - Oval - Red
- Shop: Optronics LED Trailer Light - Brake, Tail, Turn - Submersible - Round - Red
- Shop: Rubber Grommet for 4" Round Trailer Lights - PVC
- Video: All You Need to Know About the Peterson Trailer Tail Light w/ Steel Housing
- Video: Optronics LED Trailer Tail Light Feature Review
- Q&A: Replacement for Round Tail Lights From Superbrightleds
- Q&A: Will 4" Round LED Light Fit 4" Recessed Opening
- Q&A: Dimensions of the Mounting Holes of the LED Trailer Stop/Turn/Tail Light # STL43RBX
- Shop: Peterson Trailer Tail Light w/ Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens
- Q&A: Replacement Wheel Similar To Lionshead Bobcat
- Q&A: Needing Brakes, Hubs, Bearings and Seals for a set of AL-KO Axles with 10 X 2-1/4 Inch Brakes
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: Replacement Disc Brake Caliper Needed For A 10,000 Pound Hayes Axle
- Article: Trailer Wiring Diagrams
- Article: What Size of Boat Trailer do I Need?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Lighting Requirements
- Article: Trailer Maintenance Schedule
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)