How to Reconnect Wires From Pollak Wiring Harness Extension # PK11-934

Updated 03/20/2018 | Published 03/17/2018

Question:

Yellow, brown, white, black, red and green wires in pollak black connector. Brown and green wires pulled out, need to reconnect.

asked by: Greg D

Expert Reply:

It sounds like the brown and green wires have been pulled out from the plug-in harness on your Pollak Wiring Harness Extension # PK11-934. To reconnect the wires, you will just need to make sure they are connected to the appropriate pins on the plug.

When looking at the back of the plug end on the harness, the brown wire should connect to the open port in the 9 o'clock position and the green wire will connect at the 1 o'clock position. I have attached an image that you can also use for reference.

expert reply by: Chris R