bing tracking image
Q & A Icon

How Much Torque is Applied to a Kodiak Grease Cap for Installation  

Updated 07/29/2025 | Published 03/12/2018

Question:

What size socket is correct for the Kodiak oil hubs, also for the Dexter screw on oil hub cap.

0

Expert Reply:

I spoke to my contact at Kodiak and they informed me that a socket should not be used when removing or installing the grease cap like part # KPCAP as this would likely cause damage to the polycarbonate material used in it's construction. If the cap was over tightened then you can use a crescent wrench to loose it. The cap should then only be hand tightened. The same holds true for part # RG04-230.

expert reply by:
0
Conner L
Frank R. profile picture

Frank R.

10/29/2021

What is the size of the O ring on the cap?

Les D. profile picture

Les D.

11/1/2021

I had to parts folks pull this and measure. The inside dimension is 2-9/16 inch, and it is 1/8 inch thick.
Frank R. profile picture

Frank R.

11/1/2021

@LesD thanks. You guys are awesome.
Steve profile picture

Steve

7/29/2025

So how do you keep the oil from leaking out? This is on the 1.98 size.

Robin H. profile picture
Etrailer Expert

Robin H.

7/29/2025

@Steve by hand tightening. That doesn't mean it won't be tight, just that you aren't going to crank it down with a wrench.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>