Slide Toppers for 2017 Keystone Montana High Country

Question

Question:

They are 77.5" 75.5" 149.5" And there's two at 83" There is 5 total Thanks

asked by: Mathew F

0

Expert Reply:

Unfortunatley we do not have any type of part lists for specific years, makes and models of trailers; there are an overwhelming amount. However, once you measure let me know and I can confirm for you what you'll need.

expert reply by: Kyle S

0

click to enlarge

Mathew

3/26/2018

They are 77.5" 75.5" 149.5" And there's two at 83" There is 5 total Thanks

Kyle S.

3/26/2018

Thank you for the dimensions; we can accommodate you with all five slide toppers, and all come in black. The Solera 7' Slider (Slide-Topper) # LCV000168105 is for a box width range (including flange) of 74" to 79-3/4" so you need a pair of those. The Solera 7.5' Slider (Slide-Topper) # LCV000165062 has a box width range of 80" to 85-3/4" so you need a pair of those as well. Finally, the Solera 13' Slider (Slide-Topper) # LCV000165061 has a box width range of 146" to 151-3/4" so you need one of those. I've added links to video reviews for you to take a look at as well.

Answer 1

The outer brackets (hexagon heads) have changed with the Solera 5000 Series slide toppers so you'll have to slide them off of the inner brackets to install the Solera RV Slide-Out Awning #LCV000165062. You can leave the inner brackets mounted to…

view full answer...

Answer 2

For your 7' slide-out you should be able to use the Black Awning #LCV000165062 which fits 80" - 85" slide-outs and an awning rail that is 85" wide. Then for your 15' awning it can be a little tricky because there isn't a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Slide Toppers for 2017 Keystone Montana High Country

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching