How Wide is Draw-Tite Trailer Hitch Receiver # 75685?

Question

Question:

What is the depth of the mounting plate?

asked by: Dimo M

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # 75685 is 9-1/2 inches wide at the mounting plate.

expert reply by: Jason S

0

click to enlarge

Dm

3/9/2018

What is the depth of the mounting plate?

Jason S.

3/9/2018

I went out to our warehouse and took every measurement I could think you might possibly need. I've attached a photo to assist. The rough dimensions of the hitch are 9-1/2 wide by 6-5/8 long by 4-1/4 inches tall.

Richard

12/30/2025

@JasonS I believe Dm is asking what the depth, or thickness is. Is the Draw-tite 75685 thicker and therefore it doesn't need a spacer?

Gwendolyn Y.

12/30/2025

@Richard The Draw-Tite part 75685 (now no longer available) doesn't have thicker metal, it would be the same as the Curt hitch part # C13043 and the etrailer hitch part # e46YR. The Draw-Tite hitch is going to have 18" of clearance from the ground where as the Curt and etrailer hitch, since they have that extra bracket, are going to have slightly less at 17-1/2" of clearance.

Answer 1

The only aftermarket hitches available for your 2023 Lexus GX 460 are Class III like the etrailer #e46YR. We get this question with some frequency and at this point I would say there won't be a Class IV developed outside of the OEM hitch. This…

view full answer...

Answer 2

I do have a trailer hitch for your 1990 Mitsubishi Montero, but I spoke with my contact at Curt and he confirmed that the Curt Class III Trailer Hitch, #13091, was designed to fit only the 1992 to 2000 Mitsubishi Montero except the sport model. The…

view full answer...

Answer 3

While you are correct that we offer a couple great choices for Class III hitches for a 2022 Lexus GX 460, we cannot confirm whether hitch manufacturers are developing a design for a Class IV application. With that being said, the only current route…

view full answer...

Answer 4

I had the width of the frame bracket on the etrailer.com Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98856 measured and it will be 3-1/16 inches. You may need a small spacer to make this work, but it will be the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

How Wide is Draw-Tite Trailer Hitch Receiver # 75685?

Continue Researching