Mounting Bracket for 4-Way Connector

Question

Question:

Thank for the reply. What is the width of the hole of the Hopkins HM48595? Thank you

asked by: Mike S

0

Expert Reply:

The Hopkins Fold-Over Mounting Bracket # HM48595 is a stand-alone bracket and would not be compatible with other brackets such as Mount Bracket # 18140. What you would want to use is bracket # 18140 along bracket # 18144. You can see how they work together in the video I've linked for you.

expert reply by: Kyle S

0

click to enlarge

Mike

2/14/2018

Thank for the reply. What is the width of the hole of the Hopkins HM48595? Thank you

Kyle S.

2/14/2018

The width between the mounting holes of the Hopkins Fold-Over Mounting Bracket # HM48595 is 2 inches, as you can see in the accompanying photo. I've also added a link to a video review of this part for you to take a look at.

Answer 1

I do have a few items you can look for that will give you an idea as to whether or not your 2018 Chevrolet Equinox came equipped with the factory tow package (K5L) or not but the only sure fire way to tell would be to obtain your VIN and contact the…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

I'm assuming that you're needing to know so you can choose the correct wiring harness, correct? You could call your Lexus dealer and give them your VIN, and they should be able to tell you how your RX350 is equipped. Or, you could remove the…

view full answer...

Answer 4

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 5

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 6

The Hopkins Fold-Over Mounting Bracket #HM48595 that you referenced can't work with Curt harnesses like the part #C56040 or the T-One kit part #118467 as it's a bit too small. You'd have to use the Hopkins wiring harness part #HM11143865…

view full answer...

Answer 7

All 2-inch hitches we offer for your 2018 Subaru Outback Wagon appear on the page I linked for you and these of course include the Draw-Tite #76227. This hitch has a MUCH more involved installation process than other options we offer. This hitch…

view full answer...

Answer 8

The Hopkins Fold-Over Mounting Bracket #HM48595 that you referenced is a universal fit. This means that it will be compatible with most, but not all 4-Way connectors that are out there as design can vary between manufacturers. You can use the…

view full answer...

Answer 9

The best trailer hitch that is offered for your 2019 Subaru Outback Wagon is the Draw-Tite Max-Frame Trailer Hitch Receiver part #76227. The reason that this trailer hitch is the best is because it is hidden which means only the receiver tube portion…

view full answer...

Answer 10

I went out to the warehouse so I could physically test the fit of the 4-Way on the Curt T-Connector Wiring Harness #C56245 and the Hopkins Fold-Over Mounting Bracket #HM48595. I found that the 4-Way connector, along with the dust cap, were just a bit…

view full answer...

Answer 11

That is an excellent choice for a trailer hitch and bike rack for your 2016 Subaru Outback Wagon! When we installed the Draw-Tite Max-Frame Trailer Hitch Receiver #76227 on a '16 Outback Wagon we found that from the center of the hitch pin hole…

view full answer...

Answer 12

You'll want to ensure your current factory hitch can be removed (it should be bolted on and not welded), and if so, there is a trailer hitch receiver with a concealed crosstube that does fit your 2010 Subaru Outback, which is from Curt. Since you…

view full answer...

Mounting Bracket for 4-Way Connector

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching