Recommended Maintenance of Demco Hijacker Autoslide
Updated 02/12/2018 | Published 02/11/2018 >
Products Featured in This Question
Question:
We bought the autoslide from you last year. We arent sure of the best type of grease to use for regular maintenance and which components need to be greased. The manual is light on detail.
asked by: Jody E
Expert Reply:
For your Demco Hijacker Autoslide # DM8550034, the maintenance is fairly easy compared to the function of the slider. You will wan to remove the two side gear covers and inspect the gear system for any wear or issues. Then you may apply light grease on the gear area.
On the jaw handle, apply light coat of grease between the arrows.
Inspect lower guide plates and roller. Apply lithium grease to the side guide plates. Remove 1/2 inch bolt and washer from roller. Grease Inner diameter of roller and reinstall with blue threadlocker # LT37643 and torque to spec on page 6 of your manual.
For your grease, I recommend the UltraLube LMX # L11390 or # L10300
Product Page this Question was Asked From
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs
- 5th Wheel Hitch
- Sliding 5th Wheel
- Above Bed Rails
- 4500 lbs Vertical Load
- 18000 lbs GTW
- Double Pivot
- Premium - Single-Hook Jaw
- 16-1/2 - 19-1/4 Inch Tall
- 14 Inch Fore/Aft Travel
- Demco
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: a90416
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK3-200
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK3-210
- Video: The Low-Down on the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes
- Video: Breaking Down the Gen-Y Capture Plate for PullRite 5th Wheel Sliding Hitches
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Gen-Y Capture Plate for PullRite 5th Wheel Sliding Hitches
- Q&A: Do Hubs have to be Removed to Add Grease to Bearings on an EZ Lube Trailer Axle
- Q&A: Does Using Gen-Y Capture Plate for Pullrite Hitch Also Require Using Pullrite Capture Plate
- Q&A: License Plate Bracket To Mount On RV Rear Ladder
- Q&A: Is Permatex Needed When Installing Grease Seals In Trailer Hub
- Q&A: What is the Grease Seal ID for the Dexter 7K Trailer Axle
- Shop: Trailer Wheel Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal
- Q&A: Will Demco Hijacker Autoslide 5th Wheel Hitch Work with Gen-Y Hitch Shock Absorbing Pin Box
- Q&A: Can I Use the Demco Autoslide Capture Plates for Rota-Flex Pinbox with a Standard Pinbox?
- Shop: DeeMaxx 13" Rotor - 8 on 6-1/2 - Maxx Coating - 7,000 lbs
- Shop: Portable Power Watchdog Surge Protector with Bluetooth and WiFi - 50 Amp
- Shop: Portable Power Watchdog Surge Protector with Bluetooth and Emergency Shut Down - 30 Amp
- Shop: Kodiak Disc Brakes - 13" Hub/Rotor - 8 on 6-1/2 - E-Coat - 7,200 lbs - Oil
- Shop: Portable Power Watchdog Surge Protector with Bluetooth, WiFi, and Emergency Shut Down - 50 Amp
- Search Results: for 7000 lbs axles trailer hubs and drums
- Shop: Fifth Wheel Hitch
- Search Results: dexter 7000 lb axle bearings
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Video: B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring




