Is Permatex Needed When Installing Grease Seals In Trailer Hub
Updated 07/26/2021 | Published 07/21/2021
Products Featured in This Question
Question:
Thanks one more question. Do you recommend using permatex or another sealant on the O.D. of the seal?
asked by: Jeffery R
Expert Reply:
Generally speaking, there is no need to apply a gasket maker on the outside of a grease seal prior to installing it in the hub. This is not really common practice nor have I ever seen any issues not doing so. That said, I am aware there are certain manuals from Dexter Axle which state this needs to be done. If you're using Dexter Axle hubs then I would simply recommend you following their instructions. We don't carry Permatex but the Loctite RTV 598 High-Performance Silicone Gasket Maker part # LT37467 is a compatible substitute.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: 25580
- Search Results: 25580 bearing
- Search Results: 010~036~00
- Search Results: dexter 8 219
- Search Results: 12192tb
- Shop: Grease Seals 10-36 (pair)
- Shop: Timken Replacement Trailer Wheel Bearing - LM67048
- Q&A: Replacement Grease Seals for Dexter Part # 010-036-00 on a 7,000lb Trailer Axle
- Shop: Trailer Wiring
- Video: In-Depth Review of the Timken Replacement Trailer Wheel Bearing
- Shop: Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Left Hand - 7,000 lbs
- Shop: Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Search Results: 10~36 seal
- Search Results: 023~180~00
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Replacement Trailer Hub Bearing - 25580
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2
- Video: Comprehensive Review: Loctite RTV 598 High-Performance Silicone Gasket Maker
- Q&A: Can a 14125A Trailer Wheel Bearing Replace a 15123 Bearing
- Q&A: Does it Matter Which Wires are Power or Ground for Electric Trailer Brakes
- Video: All You Need to Know About the Grease Cap, 2.44" OD Drive In
- Video: Grease Seals 10-36 (pair) Feature Review
- Q&A: Replacement Seal Recommendation for Dexter 010-004-00
- Video: A Closer Look at the 7-Piece Installation Set for Bearings, Races, and Seals
- Q&A: How to Install Races in a Hub Assembly
- Q&A: What Size Socket Works with 1 Inch Spindle Castle Nut # 165686?
- Video: Timken Bearing Kit Step-By-Step Replacement - Utility Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Q&A: How to Grease a Dexter EZ Lube Axle