Washer and Nut Diameter on # 20906 Metal Valve Stem

Question

Question:

I have a 2016 Forest River Silverback with spoke aluminum 6 lug 16inch wheels made by Tredit I dont know model of wheel. The valve stem hole is recessed, so I need to know the diameter of the washer and the size of locking nut to see if it will fit and if a thin wall socket will work. Otherwise Ill have to go with an Enkie style high pressure stem.

asked by: Aaron M

0

Expert Reply:

The Americana Metal, Bolt-In Valve Stem - 1-1/4" Long - Over 100 psi # AM20906 comes with 2 rubber grommets; one that fits 0.453 inch holes and one that fits 0.625 inch holes. The diameter of the washer which is the largest part is .743 inches. The nut will be 0.640 inches in diameter.

expert reply by: Jason S

0

Answer 1

Hey Tracy, thanks for all of the information. Since your 2025 Silverado 1500 LTZ does not have the Adaptative Ride Control feature, I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers item #AL88288. The…

view full answer...

Answer 2

Hey Mark, thanks for the information! The best option to fix your truck's squatting issue is going to be to install the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers item #AL88288. These air springs have a…

view full answer...

Answer 3

To find the correct valve stem for your Lionshead Jaguar wheel you only need to measure the diameter of the hole the valve stem is coming through. It is likely that the Americana Metal, Bolt-In Valve Stem #AM20906 will work for you as it includes a…

view full answer...

Answer 4

Hi again, Shawn! Trailer wheels typically do not have psi ratings as that refers more to the tire and valve stem. With the Lionshead Liger #LH49FR having a rubber valve stem like the #AM20907, it is currently rated to 100 psi and under. If you wanted…

view full answer...

Answer 5

Hey Jason, for a set of metal valve stems that fit your 2023 Grand Design 2910BH we have the part #AM20906 that you referenced which will fit and work great with your TPMS cap sensors.

view full answer...

Answer 6

Yes, since the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel #AM22627 only works with 0.453" valve stems, the Americana Metal, Bolt-In Valve Stem #AM20906 will work great as it's designed to be used on both 0.453" and 0.625" rim…

view full answer...

Answer 7

We actually have had customers make the swap from rubber valve stems to metal valve stems so they can use the TST TPMS for RVs - Color Display - Signal Booster - 4 Flow Through Tire Sensors #TST-507-FT-4-C. I added the cut out of that review for you…

view full answer...

Answer 8

For a metal valve stem you can use with your 15" Condor Aluminum Wheel - 6 on 5-1/2 - LR D item #LH57VR, I recommend the Americana Metal, Bolt-In Valve Stem item #AM20906. This valve stem is rated for up to 200 psi and has a chrome plated brass…

view full answer...

Answer 9

For a metal valve stem you can use with your Aluminum Cheetah Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Silver you need the Americana Metal, Bolt-In Valve Stem #AM20906. This valve stem is rated for up to 200 psi and has a chrome plated…

view full answer...

Answer 10

On valve stem #AM20906 the metal washer has an outer diameter of 0.74 inches and inner diameter of 0.41 inches. The large rubber grommet has an outer diameter of 0.75 inches and inner diameter of 0.38 inches and is 0.3 inches tall. The small grommet…

view full answer...

Answer 11

For the #AM20353 Dexstar steel spoke 14 x 5-1/2 inch trailer wheel, the correct metal valve stem would be part #AM20906 which includes grommets for valve stem holes measuring 0.453" and 0.625". The wheel you looked at would use the 0.453…

view full answer...

Answer 12

For a metal valve stem that fits your Aluminum Jaguar Trailer Wheel you can use the Americana Metal, Bolt-In Valve Stem - 1-1/4" Long #AM20906. I have attached a picture showing what it will look like once installed on your wheels.

view full answer...