How to Find Metal Valve Stem for Lionshead Jaguar Wheel

Question

Question:

I have Lionhead Jaguar wheels on my RV. 16” 6 on 51/2” bolt centers. I need to find out the proper steel valve stems for them or at least high pressure rubber. I hope upon can help.

asked by: Gary D

0

Expert Reply:

To find the correct valve stem for your Lionshead Jaguar wheel you only need to measure the diameter of the hole the valve stem is coming through.

It is likely that the Americana Metal, Bolt-In Valve Stem # AM20906 will work for you as it includes a pair of rubber grommets that fits the common 0.453" and 0.625" diameter rim holes on trailer wheels. This stem is rated for over 100 psi and is 1-1/4" long. It's made of chrome-plated brass. I've attached a link to a video review of this stem for you to check out.

expert reply by: Kyle S

0

Answer 1

The Aluminum Jaguar Wheel #274-000011 does not have a PSI rating, but it's included valve stem does and is rated to 80 PSI. If the tire you're installing requires more air pressure then that, you'll just need to replace the included valve…

view full answer...

Answer 2

The diameter for the valve stem hole on the Aluminum Jaguar Trailer Wheel #274-000011 is 0.625".

view full answer...

Answer 3

According to Lionshead, their #274-000011 16 x 6 Jaguar wheel can handle the pressure needed to inflate any tire that can be mounted upon it. The so-called weak link would be the valve stem. With a 110 psi tire such as the #LHWL410 235/85-16 load…

view full answer...

Answer 4

On valve stem #AM20906 the metal washer has an outer diameter of 0.74 inches and inner diameter of 0.41 inches. The large rubber grommet has an outer diameter of 0.75 inches and inner diameter of 0.38 inches and is 0.3 inches tall. The small grommet…

view full answer...

Answer 5

For a metal valve stem that fits your Aluminum Jaguar Trailer Wheel you can use the Americana Metal, Bolt-In Valve Stem - 1-1/4" Long #AM20906. I have attached a picture showing what it will look like once installed on your wheels.

view full answer...

Answer 6

The opening for the valve stem on the Aluminum Liger Trailer Wheel item #LH49FR is 0.625 inches.

view full answer...

Answer 7

The closest 16" wheel we have to the 14" Aluminum Jaguar Trailer Wheel you found is the 16" Aluminum Jaguar Trailer Wheel #274-000011. This is a 16"x6" wheel with the 6 on 5-1/2" bolt pattern you are looking for. It is…

view full answer...

Answer 8

5,200 lb is a really common axle size so most likely that number is either unrelated to capacity or is what the axle capacity the wheel is normally used with which a wheel like the #274-000011 would easily work as it has a capacity of 3,200 lbs. That…

view full answer...

Answer 9

The Westlake ST235/80R16 Radial Tire w 16" Jaguar Aluminum Wheel - 6 on 5-1/2 - LR E - Silver #LHAWSJ511S came with a silver Jaguar wheel. We have the same wheel in black that you might be interested in with the Aluminum Jaguar Trailer Wheel -…

view full answer...

Answer 10

For a metal valve stem you can use with your Aluminum Cheetah Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Silver you need the Americana Metal, Bolt-In Valve Stem #AM20906. This valve stem is rated for up to 200 psi and has a chrome plated…

view full answer...

Answer 11

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

How to Find Metal Valve Stem for Lionshead Jaguar Wheel

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching