Will Bulldog Electric A-Frame Trailer Jack Travel High Enough to Lift Truck and Trailer
Updated 01/15/2018 | Published 01/13/2018
Products Featured in This Question
Question:
Will this jack pickup the trailer and back of truck high enough to install distribution bars, it takes alot of power on manual jack
asked by: ROB C
Helpful Expert Reply:
On Bulldog electric trailer jack # BD500199 the screw (operated by the motor) travels 14 inches and the drop leg travels 8 inches for a total lift amount of 22 inches. When the jack is fully retracted it measures approximately 9-3/4 inches from the mounting surface to the bottom of the foot. When fully extended including the drop leg that measurement would be about 31-3/4 inches. You can use this data compared to the measurements of the truck to determine if 22 inches of total lift will be enough.
The electric A-Frame trailer jacks with the most travel are # EJ-3520-BBX for black or # EJ-3520-WBX. Each has 25-1/8 inches of lift and they are rated for 3,500 pounds. But the overall measurement from the mounting surface to the bottom of the foot when extended is 28-1/2 inches meaning the Bulldog jack would still lift it a little more.
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: A Closer Look at the Blue Ox Avail Non-Binding Tow Bar on a 2010 Fleetwood Fiesta Premium Motorhome
- Shop: Electric Jack w/ Footplate and 7-Way Plug - A-Frame - 25-1/8" Lift - 3.5K - Black
- Shop: Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black
- Shop: Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black
- Shop: Equal-i-zer Weight Dist Shank - 18" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Q&A: Dimensions Of The Bulldog Powered Trailer Jack # BD500199
- Q&A: Dimensions of Bulldog Electric Jack # BD500199 from Mount to Motor Housing
- Q&A: Spring Loaded Pull Pin Compatibility For Round A-Frame Tongue Jacks
- Q&A: Mounting Bolt Hole Pattern For The Bulldog Powered Drive Trailer Jack # BD500199
- Q&A: Dimensions of Bulldog Powered Jack BD500199 and Dutton Lainson DL22530
- Q&A: Recommendation For Gaining Tail Gate Clearance On Travel Trailer Camper Tongue Jack
- Q&A: How Wide Is the Head on the Bulldog Powered Drive Trailer Jack
- Shop: Rapid Hitch Ball with 2" Diameter - 8,000 lbs GTW - Greaseless AlumiBall
- Shop: Replacement Nylon Cap for Greaseless HardBall Hitch Ball with 2-5/16" Diameter
- Shop: TempMinder Wireless Thermometer and Hygrometer - Black
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Search Results: trailer jack
- Video: How to Choose a Trailer Brake Controller
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Camper Jacks
