Is There Underbody Trimming Required to Install Curt Hitch on 2017 BMW X3 M Sport

Question

Question:

With the two hitches offers for the X3. If the x3 has the Msport package will the facia need to be trimmed or just the underbody? Thx

asked by: Andres E

0

Expert Reply:

I checked with Curt and they list Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # C13316 as a fit for all models of the 2017 BMW X3. But what that means for your M Sport version is that there could be additional trimming required to install the hitch. For more information on trimming please see the instructions for this hitch which I have linked for you.

I attached a picture of the underbody panel trim diagram for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Erick S.

2/16/2020

I am planning to pull a Uhaul trailer 5 by 8 with this spec.does the hitch has 3,500.00 lbs rating. and total weight of cargo is 1,800 lbs. can your hitch handle it

Jason S.

2/18/2020

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13316 is rated for 3,500 lbs towing and 350 lbs tongue weight. If you were to use a weight distribution system, that would increase, however I'm sure you don't want to go that route with a rental trailer. You will be able to tow your 5x8 rental loaded as you stated. You will also want the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness with Installation Kit # 119147KIT to get your needed 4 way flat trailer lights. I also recommend the etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs # e77DR to give you the 2 inch hitch ball and options for level towing height.

Helpful Links

tv-install-curt-class-iii-trailer-hitch-2016-bmw-x3-c13316.aspx

tv-install-trailer-wiring-2015-bmw-x3-119190kit.aspx

Answer 1

Hi Gregg; aside from the trimming of the underbody panel the installation of the #DT56GR will not change your 2025 BMW X3 xDrive. Everything will still function as it does now. The only difference will be the added ability to carry accessories like a…

view full answer...

Answer 2

I do have a solution for you, but unfortunately there are no custom-fit bolt-on trailer hitch options for your 2002 Ford E-450 bus. What you need is a universal hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver #41990-16. This…

view full answer...

Answer 3

Curt does offer a hitch for your 2018 BMW X4, their 2-inch Class III model #C13316. This installs using included hardware as outlined in the linked instructions. This USA-made hitch is designed to have a very clean and unobtrusive appearance on the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Is There Underbody Trimming Required to Install Curt Hitch on 2017 BMW X3 M Sport

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching