How to Attach a Trailer with a 3-Way Connector to a Vehicle with a 7-Way Connector
Published 11/03/2017
Products Featured in This Question
Question:
Hi, I have a 1987 lance that had an old 3 way plug for running lights and 12v battery connection. I have a 7 way plug in the bed of my truck. I am trying to figure out how to connect the 3 original wires into a new 7 way male plug. After many different configurations, the only results I get are no running lights, or running lights stay on, even when my truck is off. As far as I know the 3 wires should be a ground, running lights, and the 12v charging. If anyone knows how I can get this to work, that would be great. Thanks
asked by: Simon
Expert Reply:
A 3-way trailer connector is extremely rare and they really do not make any sort of adapter that will allow you to use this trailer connector with a 7-way connector. The only option that I have for you would be to replace the 3-way trailer connector with a 4-way trailer wiring harness and then use a 4 to 7-way trailer connector adapter.
It is required by law in most states that your trailer has turn, brake, and running lights therefore if your current trailer's lights do not have these features then they will need to be replaced by a light that does have these features. If your existing trailer lights do not have these features then you can use the Standard Trailer Light Kit with 25' Wire Harness part # TL29BK which comes with 2 taillight assemblies, 2 amber marker lights, 1 licence plate brackets, and 1 24' 4-way trailer wiring harness. If your taillights already have turn, brake, and running lights then all you will need to do is install the Wesbar 4-Way Flat Trailer Wiring Harness part # 002220 on your trailer.
Once the 4-way trailer wiring harness is installed on your trailer, you can then use the Pollak 7 Pole to 4 Way Connector Adapter part # PK12716 to attach the 4-way trailer connector on your trailer to the 7-way trailer connector on your vehicle.
I have attached an installation video of both the wiring harness and tail light kit for you as well.
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Complete Breakdown of the 3rd Brake Light Logic Module
- Shop: Replacement Premium Wall Thermostat for Furrion Chill HE RV Air Conditioner - Single Zone - Black
- Search Results: l44649
- Search Results: l44649 bearing
- Search Results: third brake light module
- Article: Trailer Wiring Diagrams
- Shop: etrailer MC4 Expansion Branches - Qty 2
- Q&A: Replacement for Discontinued Bargman 30-91-010 and 30-91-011 Tail Lights
- Shop: Replacement Wall Thermostat for Furrion Chill HE RV AC - Multi Zone - Black - R32
- Shop: Propane Adapter Fitting - 3/8" Female SAE Flare x 1/4" Female NPT
- Shop: TowSmart 4-Way Flat Connector Rapid Repair Trailer Wiring Kit
- Shop: Thinline LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 9 Diodes - Red Lens
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C
- Q&A: Troubleshooting Logic Pacer 3rd Brake Light Module PP20-702 Wiring
- Q&A: Standard Color Code for Wiring Simple 4 Wire Trailer Lighting
- Search Results: safety chain
- Q&A: Brake Light Logic Module for Use With 3rd LED Brake Light
- Q&A: Can You Use The 3rd Brake Light Logic Module With A 4-Pole
- Q&A: Pacer Performance 3rd Brake Light Logic Module Not Filtering Out Turn Signals
- Q&A: Pacer Performance 3rd Brake Light Logic Module Wiring
- Shop: Vehicle Tow Bar Wiring
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
on Trailer Wiring
