Roller Bunks Rated for More Than 1,500 lbs

Question

Question:

I noticed that the unv. Rollers for boat trailer CE27700 are rated for 1500 Lb. do you have any heaver

asked by: Ernie W

0

Expert Reply:

There are roller bunks for boat trailers rated for over 1,500 lbs; you could use the Dutton-Lainson Boat Trailer Deluxe Roller Bunk # DL21740, which are rated for 2,500 lbs and install with Boat Trailer Roller Bunk Bracket # DL21762.

I've attached links to video reviews of the roller bunks for you to take a look at.

expert reply by: Kyle S

0

click to enlarge

Answer 1

I am happy to help. To allow you to launch your 16' Crestliner Pontoon easier you will want to add roller bunks to your current bunk boards. The correct amount will be dependent on how long your bunk boards are. If you have 10' bunk boards…

view full answer...

Answer 2

For starters, in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part #CE29505 on your boat trailer you will also need to use the CE Smith Panel Bracket for 12" Boat Trailer Rollers part #CE10305G and the Roller Shaft with…

view full answer...

Answer 3

The keel rollers on a boat trailer are deigned to absorb shock while loading and launching your boat so you don't put as much stress on other components such as the bunk boards. The correct one will be chosen based on the shape of your boat's…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 6

Yes, you would want to use two sets of 4 foot roller bunks since your current bunks are 8 feet long. I would recommend you go with the Dutton-Lainson Boat Roller Bunks #DL21740. These roller bunks would have plenty of capacity and would be sized…

view full answer...

Answer 7

The end to end span of the CE Smith Bolster Bracket #CE10052-32G for Pontoon Boat Trailers is 15.03 inches, which, according to CE Smith is the most important measurement when talking about pontoon trailer brackets. CE Smith cannot guarantee these…

view full answer...

Answer 8

The overall measurement from the top of the roller to the bottom of the U channel is 2-1/2 inches. I have provided a photo for you that shows the dimension you inquired about. I have linked you to a parts review video for the Roller Bunk #DL21741 you…

view full answer...

Answer 9

We do have a variety of roller bunks that can be used as a direct replacement for carpeted bunks. I recommend either going with the 2,500 lb capacity which comes in Black #DL21754 or Silver #DL21740, OR the 3,000 lb capacity which also comes in Black…

view full answer...

Answer 10

The longest section of roller bunks we offer is 5 feet like the part #DL21741 that you referenced. For a 10 foot long section you would want to use one 5 foot section like the #DL21741 and then a set of 4 feet long roller bunks like the part…

view full answer...

Answer 11

If you have adjustable brackets for the bunk boards then you could lower them down and mount the CE Smith Roller Bunks for Boat Trailers #CE27710 directly to them. If you don't have adjustable brackets then you would need to remove the bunk…

view full answer...

Answer 12

The Dutton-Lainson Roller Bunks, #DL21741, do not have to start at the beginning of the stern. To install the roller bunks on your 6 foot bunks you could mount one 5 foot section on your bunks and leave 6 inches on each end. The 5 foot roller…

view full answer...

Roller Bunks Rated for More Than 1,500 lbs

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching