Log Splitter Hub Recommendation with BT8 Spindle
Updated 10/17/2017 | Published 10/16/2017 >
Question:
Hi, Im working on a log splitter that needs new wheel bearings as well as tires. It has 8 wheels with integral hubs. Im having a hard time getting the bearing races out of the wheels due to heavy rust. Since the tires are dry rotted and in need of replacement Im looking at different options. Im wondering if I would be able to install these hubs in place of the original wheel/hub assemblies? The original assemblies used 1 I.D. inner and outer bearings, and a 1.25 I.D. inner seal. I guess the only measurement Im concerned about is the span between the bearings. Is that normally a standard measurement with this size spindle? Measurement pictures are included, will this hub work for my application? Any help would be appreciated!
asked by: Matt
Helpful Expert Reply:
Based on your dimensions you have a BT8 style hub so the part # AKIHUB-440-2-1K you mentioned would fit and work well. The length of your spindle matches what this is compatible with as well.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 8 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Q&A: Can Log Splitter Trailer with Integrated Hub/Wheels be Replaced with Standard Hubs
- Shop: CE Smith Spindle Axle - Weld on - 1-1/16" Diameter
- Q&A: Finding Replacement Wheel Bearings for Log Splitter With a 3/4 Inch Diameter Spindle
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range C
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range D
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer wiring
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Shop: Suspension Enhancement
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Search Results: trailer jack
- Article: How to Measure for Trailer Hitch Drop
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Shop: Brake Controller
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Search Results: trailer lights
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)


