Can Spring Seats be Removed and Welded On in Different Spots on Dexter Trailer Axle 20440I-ST-60

Updated 09/26/2017 | Published 09/25/2017

Products Featured in This Question

Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs

(406)

$279.11

Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1

(634)

$14.17

Question:

Im planning to install a new axel in my utility trailer, the measure from hub to hub is 60inch that match the one you have for 2000 lb axel, but for spring-center to spring-center are than 30, could I removed the spring bracket from the axel and weld them at the right measure for my trailer ?

asked by: Hernan A

Expert Reply:

Yes! You can weld the springs seats to a different location on Dexter trailer axle # 20440I-ST-60. But instead of cutting off the ones on the axle and welding them back on I recommend getting new springs seats, # TRSS175 (sold in quantities of 1), and welding them on in the proper position. This will ensure that the springs seats are in good shape.

expert reply by: Michael H