Replacement Hub Needed for Boat Trailer with 5 on 4-1/2 inch Bolt Pattern and LM67048 Bearing

Updated 09/11/2017 | Published 09/08/2017

Products Featured in This Question

Dexter Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2

(893)

$119.94

Replacement Trailer Hub Bearing - LM11949

(2147)

$6.35

Replacement Trailer Hub Bearing - LM67048

(2147)

$14.82

Question:

Need replacement hub for a boat trailers Its a 5 bolt 4 1/2 inch 1 1/4 inch spindel outside bearing is a LM67048

asked by: Damon

Expert Reply:

To determine what replacement hub will fit your spindle you will need the part number of your Inner Bearing, Outer Bearing, and Grease Seal. If you cannot find the part numbers then you can use a Digital Caliper # PTW80157 and measure parts B, C, and D of your spindle from the attached picture. You will want to measure them to the 3rd decimal place, like 0.725.

Currently the only hub that we have to offer which has a 5 on 4-1/2 inch bolt pattern and uses the # LM67048 bearing is the Trailer Hub Assembly # DX22XR. It uses the Inner Bearing # LM67048 (inner diameter of 1.250"), the Outer Bearing # LM11949 (inner diameter of 0.750"), and a Grease Seal with an inner diameter of 1.688". If your Outer Bearing (location D in the picture) uses the # LM67048 bearing then we currently do not have any hubs compatible with your spindle.

If this is what you spindle measures then this hub will work well for you.