Compatibility of a Thule Doubletrack Pro with a Class I Hitch on a 2017 Mazda CX-3

Question

Question:

I have a Thule Doubletrack Platform style 2 bike rack. Will this work with Draw Tite class 1 sport frame receiver hitch mounted on a 2017 Mazda CX-3?

asked by: Patrick

1

Helpful Expert Reply:

The Thule Doubletrack Pro XT, part # TH92BJ is a useable rack for a Class I Draw-Tite Sport Frame, part # 24933 . The rack weighs 35 pounds and has enough clearance to go past the rear bumper. I've included a video of the rack on a similar 2013 Mazda CX-5 so you can get an idea of what it looks like installed.

expert reply by: Jacob W

1

Answer 1

Although both the Draw-Tite #24933 and the Curt #C11418 Class I hitches look pretty different, in all the ways that matter they're very similar. Both hitches are a concealed mount, so the crossbars are hidden behind the vehicle bumper with the…

view full answer...

Answer 2

With Draw-Tite trailer hitch #76138 installed on your 2017 Mazda CX-5 Grand Touring model the distance from the center of the hitch pin hole out to the rear edge of the bumper is approximately 3 inches. The 1Up bike rack you plan on using will easily…

view full answer...

Answer 3

The Curt, #C11418 is confirmed to fit your 2021-21 CX-3 as well as the Draw-Tite Sportframe, #24933. Each of these hitches are a 1-1/4" x 1-1/4" Class I hitch with a 200 lb. tongue weight rating and a 2,000 lb. trailer weight rating. Both…

view full answer...

Answer 4

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 11

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 12

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

view full answer...

Compatibility of a Thule Doubletrack Pro with a Class I Hitch on a 2017 Mazda CX-3

Featured Help Information

Miscellaneous Media

Continue Researching