What is the Measurement of Fulton Marine Jack from the Floor to the Bottom of the Bracket?

Updated 08/07/2017 | Published 08/05/2017

Products Featured in This Question

Fulton Boat Trailer Jack w/ Wheel - Weld On - Sidewind - Swivel - 10" Lift - 1.5K

(1735)

$189.81

Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs

(145)

$121.45

Question:

Could you tell me the distance between the ground and bottom of the mounting bracket when fully retracted. In the picture I attached it is roughly 11 inch for my current broken jack.

asked by: Jeremy

Expert Reply:

I think you are on the right track. The Fulton Bolt-Thru Swivel Marine Jack you mentioned, part # F1411300301, is rated at 1500 lb. With the jack fully retracted, the distance from the bottom of the mounting bracket to the floor is 12.5". I think that part # FXP15W is the one you are looking for. It measures 11" from the floor to the bottom of the mounting bracket.

On our website, we provide the bracket height for most jacks by measuring from the floor to the center of the bracket instead of the bottom of the bracket. So, you may want to measure your jack similarly and compare that measurement to the FXP15W also. From floor to center of bracket should be 12.75" retracted and 22.75" extended.

expert reply by: Amy W