What is the Diameter of the 2-1/4" Long Torx Trailer Floor Screw # TFX225ACQ

Question

Question:

is item # TFX225acq THE 2 1/4inch UTILITY TRAILER FLOOR BOLT A 1/4 SIZE BOLT?

asked by: JEFF S

0

Expert Reply:

Yes, the 2-1/4" Long Torx Trailer Floor and Wall Liner Screw # TFX225ACQ that you referenced does have a 1/4 inch diameter. This screw is specially designed for use on Alkaline Copper Quaternary wood.

expert reply by: Jameson C

0

Answer 1

Since a 2x6 board is about 1-1/2 inches thick, I don't think using 1-1/2" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood #TFX150ACQ is going to provide sufficient contact with the trailer frame. For that reason I recommend…

view full answer...

Answer 2

The longer 2-1/2" torx screw Item #TFX250ACQ will work the best to attach the boards to the metal frame of your Big Tex trailer when replacing the trailer deck. If you need a torx head screwdriver bit, you can use part #TX430-1.

view full answer...

Answer 3

Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood #TFX225ACQ is sold in quantities of 1.

view full answer...

Answer 4

I would recommend to use the treated torx screws for ACQ (Alkaline Copper Quaternary) treated wood for better corrosion and rust resistance. The treated torx screws like the Redline 2-1/2 Inch Long Torx Trailer Screw for ACQ Treated Wood, part…

view full answer...

Answer 5

You are correct. The pilot hole size for the Torx Floor Screws, part #TF01250, is 7/32 inch. These come with 40 screws in the package, and measure 2-1/2 inches long. The screwdriver bit you may want for the Torx screws is part #TX430-1. These are…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What is the Diameter of the 2-1/4" Long Torx Trailer Floor Screw # TFX225ACQ

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching