Replacement Hubs for a 2007 Trailmanor Trailer

Updated 07/05/2017 | Published 07/03/2017

Products Featured in This Question

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

(1224)

$91.29

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased

(1715)

$106.45

Replacement Trailer Hub Bearing - L44649

(2077)

$14.16

Replacement Trailer Hub Bearing - L68149

(2077)

$14.18

4" Carbon Fiber Digital Caliper

(26)

$12.46

Question:

The hubs on my camper are severely corroded and they sound terrible. I cannot tell what Dexter axle hubs this camper has, but know they need replaced.

asked by: James C

Expert Reply:

From my research your trailer likely has a 3,500 pound axle. Which means it probably has inner bearing # L68149, outer bearing # L44649, and the hubs have a 5 on 4-1/2 bolt pattern. You definitely want to verify this before purchasing anything.

If I'm correct then I recommend # AKHD-545-35-K for the hubs. Or # AKHD-545-35-EZ-K if it has an E-Z Lube axle that has a zerk fitting on the spindles.

To determine if these are the correct parts you'll need to pull the hubs and check the bearing numbers. If you can't read the bearing numbers then measure the spindle where the bearings sit with a digital caliper like # PTW80157. The inner bearing of this kit measures 1.378 inches and the outer is 1.063 inches.