Trailer Hitch Recommendation for a Bike Rack on a 2016 Mazda 6

Question

Question:

Thanks for putting together the the video comparing the two hitches. I could not quite tell which hitch would provide a little more room off the back if I wanted to be certain I could fold a bike rack up. I have a 2016 Mazda 6 and I am looking at getting the Kuat Transfer 2. Any advice is gratefully appreciated.

asked by: Tom C

0

Expert Reply:

Since you will be using the trailer hitch for a bike rack, I recommend the Curt hitch # C11356 along with the stabilization strap, # 18050, when using the hitch for anything other than a trailer (in this case a bike rack) per Curt's warranty requirements.

The Kuat Transfer # KU74FR measures just 6 inches from the pin hole to the closest part of the rack when folded so it would not be able to fold up. The Curt hitch sticks out a little, but there is still not enough clearance to fold up the Transfer.

The next step up in the Kuat lineup, the Sherpa # SH12B, # SH12G, or # SH12P, measures 7-1/2 inches when folded up so it would clear the bumper.

expert reply by: Michael H

0

Answer 1

The Thule T2 you have part number TH916XTR is only a fit for 2 inch hitches and your 2017 Mazda 6 only has 1-1/4 inch hitches available like the Curt #C11356, which would be your best choice. My recommendation is to purchase an economical class I…

view full answer...

Answer 2

I have great news, you actually don't have to use the stabilizer straps with the Curt hitches like part #C11132 with bike racks like the Thule Helium part #TH9043PRO. They actually changed that requirement a while back so it would not be needed.

view full answer...

Answer 3

Stabilizer straps are no longer required when using a Curt hitch like the #C13130; this was an older requirement for some Curt hitches when using a bike rack only, but they have since determined that it is not required or recommended any longer. You…

view full answer...

Answer 4

I've created a photo for you showing all three hitches next to each other. The hitch in the middle 24908 by Draw-Tite is no longer available. Both of the two remaining hitches share a very similar design, have the same weight capacities and would…

view full answer...

Answer 5

Hi Bob, Let's start with the trailer hitch. If your JGC isn't a EcoDiesel or Trackhawk model, the Draw-Tite Class III hitch #75699 would be an excellent choice. If it is one of those models, let me know. Let's jump to the brake controller…

view full answer...

Answer 6

We currently have two no-drill trailer hitch receivers for your 2017 Mazda 6 Grand Touring which are the Draw-Tite Sportframe Trailer Hitch Receiver part #24908 and the Curt Trailer Hitch Receiver part #C11356. They both have a Class I rating with a…

view full answer...

Answer 7

For your 2017 Mazda 6, the Draw-Tite Sportframe Trailer Hitch Receiver #24908 was a great choice. The biggest thing to not is the hitch pin hole is about 6-1/4 inches recessed from the outermost part of the bumper. The Swagman XTC #S64670 is a great…

view full answer...

Answer 8

There are both Class I and Class III trailer hitches available that are confirmed to fit your 2010 Honda CR-V. The available Class I hitches, such as the Draw-Tite Sport Frame #24792, feature a square tube design, while the Class III hitches like the…

view full answer...

Answer 9

Draw Tite does not require the use of a stabilizer strap like part #18050 when used with non-supported loads like a bike rack or cargo carrier. It probably wouldn't be a bad idea to use the strap with a Draw Tite hitch, but failing to use it…

view full answer...

Answer 10

It sounds like the brackets on the Curt Trailer Hitch #C11356 got bent ever so slightly during the shipping process, which is a common occurrence and fixable. What you can do is flex the bracket back into position so the bolt holes line up, and this…

view full answer...

Answer 11

The Curt Hitch part #C11356 that you referenced has been confirmed to fit your 2016 Mazda 6 so I would recommend it for you. I attached an install video for you to check out as well.

view full answer...

Answer 12

Honestly, the best way to prevent scratches or damage to your vehicle's paint is going to get a hitch mounted rack like the Thule Helium #TH44VR and a trailer hitch like the Curt #C11356. We typically recommend a fresh wash and wax before…

view full answer...

Trailer Hitch Recommendation for a Bike Rack on a 2016 Mazda 6

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching