Recommended Suspension Enhancement System For 2004 Toyota 4Runner

Question

Question:

Hello, I have a question about 2 suspension products: TTORSEQ and F4135. I am hoping you can provide some guidance on which product would be better for my application. I have a 2003 Lexus GX470 that has been converted from the stock air suspension to foil springs in the rear. The rear coil springs being used are the same as a 2003 4runner. I occasionally tow a 5x10 trailer with landscape materials, motorcycle or ATVs. Would the firestone air bags or the timbres suspension enhancement be better suited to limit bounciness and body roll? I tow a max of 3,000 pounds in the trailer and only occasionally fully load the cargo area of my vehicle. Thank you

asked by: Steven

0

Expert Reply:

I recommend installing the Timbren system # TTORSEQ over the Firestone # F4135.

Since you said you occasionally tow or carry a maximum of 3,000-lbs, the Timbren system would be a nice option because you do not have to make any adjustments to the system. As more weight is added to the vehicle either from tongue weight when towing or loading the back of the vehicle, the Timbrens will stiffen to provide more support for the load.

Using the Firestone system means you will need to adjust the air pressure on the system based on the load you are carrying. Also, the Firestone system has a load leveling capacity of 1,000-lbs.

expert reply by: Jeffrey L

0

Answer 1

In order to remove the air line from the push connector on the coil air bags, you'll need to use a pair of needle nose pliers and grab the collar on the connector. If you push the collar toward the air bag and pull on the air line at the same…

view full answer...

Answer 2

The Firestone Coil-Rite Air Helper Springs - Rear Axle #F4135 are currently the only air spring fit for your 2016 Toyota 4Runner. I've attached the installation video to assist. If you want to add the compressor so you can adjust the pressure for…

view full answer...

Answer 3

Hey Bryan, Thanks for the photo and specific info you gave, and if you're sagging to the point that it's affecting oncoming drivers you definitely need suspension enhancement. That much sag is actually going to affect your 4Runner as well…

view full answer...

Answer 4

If you are able to cut the jounce bumper of your 2016 Toyota 4Runner off while leaving the coil installed on the vehicle you certainly could fit the air bag between the coils to install the #F4135 since this is commonly how it's recommended bag…

view full answer...

Answer 5

Hey Lynn, we generally don't recommend running more than one set of suspension enhancement on a vehicle because the performance of the two kits together has never been tested and most likely if you need two you are overloading things. I would…

view full answer...

Answer 6

The most common issue with air bags like the Firestone Coil-Rite Air Helper Springs part #F4135 is the connection of the air line to the other components. It is recommended to use a spray bottle with soap water to spray each fitting to see which is…

view full answer...

Answer 7

I reached out to my tech contact at Firestone, and he said that as long as there is no pinching or crimping of the air line, you can install the Firestone Coil-Rite Air Helper Springs rightside up or upside down. They will function the same as long…

view full answer...

Answer 8

Out of all the air bags we offer I recommend the Firestone Coil-Rite Air Helper Springs #F4135 for your 2023 Toyota 4Runner. I like the Firestone airbags over the other air bags we carry because they're more durable and are constructed better…

view full answer...

Answer 9

We have two options for suspension enhancement for your 2020 Toyota 4Runner which have pros and cons. The air bag kits like the Firestone part #F4135 have the advantage of being very adjustable which allows you to have the suspension support when you…

view full answer...

Answer 10

The ideal solution to level a vehicle that is sagging when towing a trailer is weight distribution and not helper springs. I can recommend both but for weight distribution you need to go by the total tongue weight. This is the tongue weight of the…

view full answer...

Answer 11

For simplicity sake you would be better off using a T-union so that you only have to inflate one thing and wouldn't have to worry about equalizing the pressure. For a union all you need is the part #AL21838.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Recommended Suspension Enhancement System For 2004 Toyota 4Runner

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching