Will Trailer Wheel with 2-1/2 Inch Pilot Hole Fit in Place of a Wheel with 2-3/4 Inch Pilot Hole
Updated 05/10/2017 | Published 05/09/2017
Question:
I am looking at replacing 5.70-8 tire and rim with 4 bolts on 4inch centers. The center hole pilot? says 2.5inch dia. on all your offerings. My existing rim measures 2.75 dia. and my spindle looks like it is 2.5inch dia. I just want to make sure it will fit. thanks,
asked by: Bob S
Expert Reply:
If the center part of the hubs on your trailer are 2-1/2 inches or smaller then tire and wheel combo # AM30120 will fit.
A pilot hole can be larger than the hub center diameter if the wheel is held on to the hub with lug nuts. But if it attaches using wheel bolts instead of lug nuts then the pilot hole has to be exact because that is how it centers on the hub. At a 2-1/2 inch hub diameter and wheel pilot hole you would be good to go either way.
Product Page this Question was Asked From
Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 5.70-8
- 8 Inch
- K - 65 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer tires and wheels
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C
- Search Results: trailer hub
- Search Results: trailer tire
- Shop: Steel Solid Center Trailer Wheel - 9" x 4" Rim - 4 on 4 - White
- Shop: Steel Trailer Wheel - 8" x 3-3/4" Rim - 4 on 4 - White
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 12" x 4" Rim - 4 on 4 - Black
- Shop: Steel Trailer Wheel - 8" x 3-3/4" Rim - 4 on 4 - Galvanized Finish
- Search Results: 480 x 12
- Search Results: cotter pins
- Search Results: grease seal
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C
- Q&A: Replacement Boat Trailer Wheel and Tire Combo 2.5" Pilot Hole 4 on 4" lug
- Q&A: Availability Of Tire/Wheel Combo With 4 On 4 Bolt Pattern And A 2.5" Pilot Hole
- Q&A: Does the Center Pilot Hole on a Trailer Wheel Have to Be an Exact Size to Fit Over the Hub
- Q&A: Is There a 4.80-12 Trailer Tire and Wheel With a 2-1/2" Hub Center Bore?
- Q&A: Can Larger Wheels And Tires Be Installed On Titan 36 Volt Cart?
- Search Results: 4 lug trailer tire 15 inch
- Q&A: How is a 4 on 4 Inch Wheel Bolt Pattern Measured
- Q&A: Factors to Consider When Adding Larger Tires and Wheels to a Trailer
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Trailer Wiring
- Video: Measuring To Choose The Right Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Article: How to Measure for Trailer Hitch Drop
on Trailer Tires and Wheels
