Replacement Key for SportRack Bike Carrier?

Question

Question:

I purchased a used SportRack bike carrier. The key was broken in the lock. I managed to pry out the key. The key has an inscription YC 108. The rack also has the inscription YC 108. I only have one key for the rack, the broken one. Can I order a couple of new keys to fit this lock? I don't want to have to saw off the bolt to disengage the lock and lose the lock.

asked by: Roger V

1

Helpful Expert Reply:

With the inscription reading YC 108 on both the key and the rack, the replacement keys you will need are # THKEYN108.

expert reply by: Kyle S

1

Answer 1

Since there isn't a Sportrack key N601 the correct key number you'd need is the part #THKEYN109.

view full answer...

Answer 2

We do have the correct key for your Sears Sport SV-20 with A108 lock core. You will want to use the Replacement Key for Thule Racks and Carriers #THKEYN108.

view full answer...

Answer 3

Most likely you will need the #THKEYN108 for a replacement key. Since we have never heard of Karrite cores starting with MM it is most likely that you have the N108 lock core. The N series of Thule keys have been proven to work as replacements for…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Key for SportRack Bike Carrier?

Product Page this Question was Asked From

Continue Researching