Recommended Trailer Hitch for 2017 Nissan Rogue

Question

Question:

do you have trailer hitch for Nissan Rogue 2017 so I can pull my deck boat?

asked by: Debbie O

0

Expert Reply:

For your 2017 Nissan Rogue, I recommend the Draw-Tite Class III Max Frame Receiver Hitch # 75902. This is a Class III trailer hitch that has a 3,500 pound towing capacity and 350 pound tongue weight capacity, although I also recommend checking your vehicle's capacity as listed in the owner's manual. This is a custom-fit hitch for your vehicle, which means no drilling will be required during installation. I have attached an installation video on your Nissan Rogue for you to check out.

Since you will be towing a trailer, I recommend installing the Vehicle Wiring Harness # C59236. This will install a 4-way connector in the rear of your Rogue to power the trailer's signal lights. I have attached the installation details for you to review.

To tow your trailer, you will also need a ball mount. I recommend looking at the etrailer.com Ball Mount Kit # 989900. This kit includes two ball mounts with different rise and drops, as well as the two most common size hitch balls. I have included an article on ball mounts that explains how to choose the best one for your setup and a link that will take you to our available selection if the ball mounts in the kit will not work.

expert reply by: Chris R

0

Marlene T.

6/21/2020

I have a 2017 Nissan rogue. What trailer harness wiring do I use everything I look at has a 4 way connector but my vehicle has a 3 way connector.

Chris R.

6/24/2020

For your Nissan Rogue the Tekonsha T-One Wiring Harness # 118480 will work perfectly. It will plug in behind the tail lights to provide you with a 4-Way connector that hooks up to the trailer so it can power its signal lights.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Recommended Trailer Hitch for 2017 Nissan Rogue

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching