Suspension Hanger Spacing for a Triple Axle Trailer with 26-5/8 Inch Long Slipper Springs
Updated 04/24/2017 | Published 04/23/2017
Question:
I am installing triple axle slipper springs on my trailer and need to know,the proper spacing for 26 5/8inch long springs.
asked by: Scott K
Expert Reply:
I can give you a general estimate but the only way to get it just right is to mock up all the parts to determine the proper locations prior to permanently installing everything.
On a triple axle trailer with 2 inch wide slipper springs the distance from the first and second hangers would be approximately 29-1/2 inches. From the second to third hangers it would be approximately 34 inches. And from the third to fourth hangers it would be approximately 29-1/2 inches. For this set up the center to center distance from axle to axle would be approximately 34 inches. This is also assuming the use of 12 inch equalizers.
If you need a complete kit then I recommend # APTT6SE.
Product Page this Question was Asked From
Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Triple Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer leaf springs
- Shop: Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Search Results: spring bushings
- Shop: Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 3-3/8" - Qty 1
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 3-3/8" - Qty 1
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Shop: Triple-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Search Results: trailer suspension parts
- Search Results: equalizer
- Search Results: e5226
- Search Results: 1203t3
- Search Results: sp~160275
- Shop: 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Q&A: Replacement Triple Axle Hanger Kit for 2015 Kaufman Car Hauler with 7k Axles
- Q&A: Torque Specs for 9/16" Trailer Axle U-Bolts
- Q&A: Specifications on the Redline Replacement U-Bolt # 176500
- Video: Detailed Breakdown of the Replacement U-Bolt w/Nuts for 8,000-lb, Round Trailer Axles
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How Much Do the Power Mountain Tallboy Off-Road Bottle Jacks Weigh?
- Shop: Brake Controller
on Trailer Suspension Parts
