Replacement Triple Axle Hanger Kit for 2015 Kaufman Car Hauler with 7k Axles
Updated 07/24/2019 | Published 07/23/2019
Products Featured in This Question
Question:
I have a 2015 Kaufman 3 car wedge - Triple axle with 7k dexter axles. The suspension hangers have gone and I’m having trouble finding the same kit / it seems the common replacement are double eye which are different than what the trailer currently has. Kaufman also has taken the hanger kit off the website as I can’t find it - any recommendations on getting the hanger kit for this triple axle trailer? Attached is the current set up
asked by: Adriel
Expert Reply:
What you have is a slipper spring setup on your 2015 Kaufman car trailer. So what you need for a triple axle hanger kit then is the part # APTT6SE which comes with everything needed.
If you need new leaf springs too you'd want the 7k rated part # e74SR for each one.
Product Page this Question was Asked From
Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Triple Axle
- Redline
more information >
Continue Researching
- Search Results: trailer leaf springs
- Search Results: leaf spring
- Search Results: leaf spring bushing
- Search Results: axle hangers
- Search Results: bushing
- Shop: Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Shop: Hub-Piloted Solid Center Wheel w -0.5" Offset - 17-1/2" x 6-3/4" - 8 on 6-1/2 - Black
- Search Results: triple axle hanger kit
- Shop: 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Shop: 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Q&A: How to Determine Correct Replacement Slipper Springs for Triple Axle Trailer With 8,000 lb Axles
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Search Results: trailer suspension parts
- Q&A: TRAILER SPRINGS
- Video: Review of EMCO Trailer Leaf Springs - 7 Leaf Slipper Spring Hook End 8000 lb Trailer Axle - EM53AJ
- Video: Feature Review 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles
- Video: Let’s Check Out the Roadmaster Comfort Ride Shock Absorbers for Triple Axle Trailers
- Q&A: Suspension Hanger Spacing for a Triple Axle Trailer with 26-5/8 Inch Long Slipper Springs
- Q&A: Could Slipper Spring # e74SR Fit 2013 Kaufman EZ4
- Video: Hydrastar Hydraulic Brake Line Kit Review
- Video: MORryde Rubber Equalizers for Triple Axle Trailers Review
- Q&A: Replacement Bearings, Races, and Seal for Lippert 7,000 Pound Axle
- Q&A: Wire Gauge Recommendation to Power 20 LED Trailer Clearance Lights
- Q&A: Hydraulic Brake Kit For a Ez 4 Kaufman Car Hauler Trailer With 7,000LB Axles
- Video: Let’s Check Out the Replacement Equalizer for E-Z Flex Suspension Kits
- Video: The Low-Down on the Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs
- Shop: Grille Guard