Comparing AxleTek Hub # AKIHUB-545-2-G-EZ-2K With Dexter Axle Hub # 8-259-50UC1-EZ

Question

Question:

Are hubs # AKIHUB-545-2-G-EZ-2K and # 8-259-50UC1-EZ interchangeable relative to size?

asked by: Albert E

0

Expert Reply:

The Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-2-G-EZ-2K and the Trailer Hub Assembly - 2,200-lb E-Z Lube Axles - 5 on 4-1/2 - 8" - 12" Wheels - Galvanized # 8-259-50UC1-EZ are interchangible for 2000 lb axles. When using on a 2200 lb axle, you want the capacity of the # 8-259-50UC1-EZ. These assemblies use the same size bearings, and seals. They also have the same bolt pattern. The difference is in capacity and a slight difference in grease cap flange diameter.

expert reply by: Jason S

0

Answer 1

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. We already know your is 5 on 4-1/2 inch. Next thing you…

view full answer...

Answer 2

The Trailer Hub Assembly #8-258-50UC1-EZ does appear to be the correct replacement hub assembly for your 2007 Tracker Trailstar Trailer. To confirm this you will want to remove the entire hub assembly and ensure the spindle is a straight spindle and…

view full answer...

Answer 3

Since the axle you have is a Dexter Model 8259 you can choose one of the hub assemblies we offer from the attached product page. If you have an EZ-Lube axle on your trailer you may want to check out part #8-259-5UC1-EZ, or part #8-259-50UC1-EZ. If…

view full answer...

Answer 4

Though it is sometimes possible to identify an axle's capacity based of the hub, it is not always 100% accurate. Due to this, I tell people to not rely on just this alone. As a quick example, if you look at the Dexter Hub #8-259-50BTUC1 and…

view full answer...

Answer 5

While it's not recommend, bearing greases with the same base like the LubriMatic Marine Trailer Wheel Bearing Grease #L54FR and your Lucas marine bearing grease can be mixed as long as long as they have the same base.

view full answer...

Answer 6

Overpacking the trailer hub with grease is the number one reason for grease seal failure. For a boat trailer I would recommend re-packing the hubs by hand with grease once per season and you'd be fine. I don't like recommending people use…

view full answer...

Answer 7

The UFP hub that you've referenced isn't made any longer I don't believe, but we do have some options for you. From some previous customers, we've determined that the UFP H-1062-3 axle has a spindle that has #L44649 inner and outer…

view full answer...

Answer 8

Any given tire size will fit a range of wheel widths. For a 175/80-13 trailer tire it will fit a 13 inch wheel that is 4-1/2, 5, or 5-1/2 inches wide. Wheel #AM20222DX is a 13 x 4-1/2 inch wheel so a 175/80-13 tire will fit on it. This wheel has a 4…

view full answer...

Answer 9

Thanks for getting me all the info needed to pick out a hub! Based on what you listed the correct hub you need for a replacement is the part #84545BX. This uses the same bearings as what you have and has a matching bolt pattern.

view full answer...

Answer 10

Thanks for all of the info on your spindle. The Dexter hub part #8-258-50UC1-EZ that you referenced is the correct fit for your spindle. The bearings match the 1.06 inch diameter and the seal diameter of 1.5 inch matches as well. We do not have a…

view full answer...

Answer 11

In order to determine if hub assembly 8-258-50UC1-EZ will work for you, first know that this assembly is for EZ Lube spindles that require a grease seal with a 1-1/2" inner diameter such as #RG06-020. You are also going to want to remove the hub…

view full answer...

Answer 12

To find the right replacement hub for your Trailstar trailer you will need to identify your current bearings and also know your bolt pattern. The bearings may have the part number stamped in the side which can be used to identify them. If the part…

view full answer...

Comparing AxleTek Hub # AKIHUB-545-2-G-EZ-2K With Dexter Axle Hub # 8-259-50UC1-EZ

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching