Industry Standard Fifth Wheel Base Rail Kit for 2014 Ford F-350

Question

Question:

Will the Anderson hitch 3200 fit the pullrite super rail kit I have in my truck pullrite part # 4426 Thanks.

asked by: Andy H

0

Expert Reply:

The Andersen Ultimate # AM3200 fits industry standard fifth wheel hitch base rails. From my research the Pullrite 4426 rails are not industry standard so the Andersen hitch will not fit.

For an industry standard rail kit you can use # RP30035 that will fit your 2014 Ford F-350.

expert reply by: Charles S

0

Answer 1

Yes it does; I verified with Hopkins that their Endurance wiring harness will fit both a 2003 and a 2013 Ford F-250. There are actually two of them, one with a 6 foot harness and the other with a 10 foot harness, which you may want depending on where…

view full answer...

Answer 2

The Curt #C16427-104 bracket/rail kit is compatible with your 2018 Ram 2500, and would provide industry standard bed rails that mount in your truck bed. The Andersen #AM3200 Ultimate Connection is compatible with industry standard rails, so the two…

view full answer...

Answer 3

The Hopkins Endurance 5th Wheel/Gooseneck Wiring Harness will connect on any vehicle that has a standard round U.S. Car type connector at the back of its 7-way. The linked photo shows the connectors on this part which plug in between the OEM harness…

view full answer...

Answer 4

The Reese M5 5th Wheel Trailer Hitch - Single Jaw - 20,000 lbs #RP30928 will fit on the same 5th wheel rails as your Pro Series 15K hitch. Reese and Pro Series are made by the same company and will use the same location on your base rails. I've…

view full answer...

Answer 5

The Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness w/ 7-Pole Connector - 6' Long #HM41158 will work on your 2015 Ford F-250 Super Duty, but depending on where you want to mount it may be a little short. If you want a longer…

view full answer...

Answer 6

The Andersen Ultimate 5th Wheel Adapter #AM3200 that you referenced can be installed in two ways. Its offset design allows the adapter to mount with the hitch ball either closer to the truck cab or to the tailgate, depending on your trailer-to-truck…

view full answer...

Answer 7

What you can do is refer to the linked diagram that shows the minimum recommended clearance at the truck bed rails when towing a 5th wheel like your Forest River Flagstaff. At the bed rails, where the trailer overhang will be, you want no less than…

view full answer...

Answer 8

The Andersen Ultimate Connection #AM3200 will fit your 2014 Ford F350 assuming that your Pullrite was installed with Industry Standard Rails (See photo below). If you don't have that kit on your F350, use Custom 5th Wheel Installation Kit…

view full answer...

Answer 9

The Andersen Ultimate Connection 5th Wheel Hitch, #AM3200, will connect to above bed industry standard rails. If you have the above bed mounted in the bed of you 2015 Ford F-250, then the Andersen hitch will mount right in the bed. The Andersen hitch…

view full answer...

Answer 10

Looking at where standard 5th wheel base rails line up with regards to the axle on your 2015 Ford F-350, the offset on the hitch ball for the Andersen Ultimate Connection #AM3200 will likely put it just a tad behind the axle when mounted. You are…

view full answer...

Answer 11

I do have an option for you, however the Andersen Ultimate Connection #AM3200 referenced in your question is not compatible with swivel/rotating pin boxes. This is simply because the combination will produce too much movement to provide a secure…

view full answer...

Answer 12

If the Anderson hitch that comes with the Rockwood 8280WS you're looking at installs into industry standard base rails, like the part #AM3200 does, then you'll need the Reese Quick-Install Custom Installation Kit w/ Base Rails #RP50026-58 for…

view full answer...

Industry Standard Fifth Wheel Base Rail Kit for 2014 Ford F-350

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching