Using the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Lippert Turning Point

Question

Question:

Can I use an Andersen 3200 5th wheel hitch with a lippert turning point hitch if the turning point hitch is set in the fixed position so it will not rotate?

asked by: James C

1

Helpful Expert Reply:

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter, # AM3200 is for fixed pin boxes only. Yes, if you lock the Lippert Turning Point that will cause it to be a fixed pin box.

expert reply by: Michael R

1

Answer 1

Yes it does; I verified with Hopkins that their Endurance wiring harness will fit both a 2003 and a 2013 Ford F-250. There are actually two of them, one with a 6 foot harness and the other with a 10 foot harness, which you may want depending on where…

view full answer...

Answer 2

The Hopkins Endurance 5th Wheel/Gooseneck Wiring Harness will connect on any vehicle that has a standard round U.S. Car type connector at the back of its 7-way. The linked photo shows the connectors on this part which plug in between the OEM harness…

view full answer...

Answer 3

The Reese M5 5th Wheel Trailer Hitch - Single Jaw - 20,000 lbs #RP30928 will fit on the same 5th wheel rails as your Pro Series 15K hitch. Reese and Pro Series are made by the same company and will use the same location on your base rails. I've…

view full answer...

Answer 4

The Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness w/ 7-Pole Connector - 6' Long #HM41158 will work on your 2015 Ford F-250 Super Duty, but depending on where you want to mount it may be a little short. If you want a longer…

view full answer...

Answer 5

The Curt #C16427-104 bracket/rail kit is compatible with your 2018 Ram 2500, and would provide industry standard bed rails that mount in your truck bed. The Andersen #AM3200 Ultimate Connection is compatible with industry standard rails, so the two…

view full answer...

Answer 6

The Andersen Ultimate 5th Wheel Adapter #AM3200 that you referenced can be installed in two ways. Its offset design allows the adapter to mount with the hitch ball either closer to the truck cab or to the tailgate, depending on your trailer-to-truck…

view full answer...

Answer 7

Looking at where standard 5th wheel base rails line up with regards to the axle on your 2015 Ford F-350, the offset on the hitch ball for the Andersen Ultimate Connection #AM3200 will likely put it just a tad behind the axle when mounted. You are…

view full answer...

Answer 8

If have a great 5th wheel option that will work for you, however, the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter #AM3200 can only be used with fixed pin boxes. The design of the Anderson Ultimate Hitches would create two…

view full answer...

Answer 9

If the Anderson hitch that comes with the Rockwood 8280WS you're looking at installs into industry standard base rails, like the part #AM3200 does, then you'll need the Reese Quick-Install Custom Installation Kit w/ Base Rails #RP50026-58 for…

view full answer...

Answer 10

Yes, the Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AM3200 does come the alignment ring. I attached a picture that shows it as well.

view full answer...

Answer 11

The Andersen Ultimate #AM3200 fits industry standard fifth wheel hitch base rails. From my research the Pullrite 4426 rails are not industry standard so the Andersen hitch will not fit. For an industry standard rail kit you can use #RP30035 that will…

view full answer...

Answer 12

It is not recommended to use two adapters at the same time. The added stress of a second adapter could cause damage to the adapters or the trailer. The Curt X5, part #16310 is designed to work with the B&W gooseneck you said is in the bed of your…

view full answer...

Using the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Lippert Turning Point

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching